Wireless Advanced Settings for the Dlink DSL-2750URouter Sceenshot

Back to the Dlink DSL-2750U



Screenshots from PortForward.com


menu Product Page: DSL-2750U Site Map       Firmware Version: AF_1.60_R01 Setup Advanced Maintenance Status Help Wireless Settings Port Forwarding Port Triggering DMZ Parental Control Filtering Options DNS Dynamic DNS Storage Service Multicast Network Tools Routing Schedules Logout Advanced Settings These options are for users that wish to change the behaviour of their 802.11g wireless radio from the standard setting. D-Link does not recommend changing these settings from the factory default. Incorrect settings may impair the performance of your wireless radio. The default settings should provide the best wireless radio performance in most environments. Advanced Wireless Settings Band: 2.4GHz Channel: Auto Channel Timer(min) 802.11n/EWC: Auto Disabled Bandwidth: 20MHz in Both Bands 40MHz in Both Bands 20MHz in 2.4G Band and 40MHz in 5G Band Control Sideband: Lower Upper 802.11n Rate: 802.11n Protection: Off Auto Support 802.11n Client Only: Off On 54g™ Rate: Multicast Rate: Basic Rate: Fragmentation Threshold: RTS Threshold: DTIM Interval: Beacon Interval: Global Max Clients: XPress™ Technology: Disabled Enabled 54g™ Mode: 54g Auto 54g Performance 54g LRS 802.11b Only 54g™ Protection: Off Auto Regulatory Mode: Disabled 802.11h 802.11d Pre-Network Radar Check: In-Network Radar Check: TPC Mitigation(db): 0(off) 2 3 4 Afterburner Technology: Disabled Enabled (Disable WMM for Selection) Preamble Type: long short Transmit Power: 20% 40% 60% 80% 100% WMM(Wi-Fi Multimedia): Disabled Enabled WMM No Acknowledgement: Disabled Enabled WMM APSD: Disabled Enabled SSID Enable Wireless Wireless Network Name (SSID) : Visibility Status : Visible      Invisible User Isolation : Off On Disable WMM Advertise : Off On Enable Wireless Multicast Forwarding (WMF) : Off On Max Clients : (1 ~ 128) Guest/Virtual Access Point-1 Enable Wireless Guest Network : Guest SSID : Visibility Status : Visible Invisible User Isolation : Off On Disable WMM Advertise : Off On Enable Wireless Multicast Forwarding (WMF) : Off On Max Clients : (1 ~ 128) Guest/Virtual Access Point-2 Enable Wireless Guest Network : Guest SSID : Visibility Status : Visible Invisible User Isolation : Off On Disable WMM Advertise : Off On Enable Wireless Multicast Forwarding (WMF) : Off On Max Clients : (1 ~ 128) Guest/Virtual Access Point-3 Enable Wireless Guest Network : Guest SSID : Visibility Status : Visible Invisible User Isolation : Off On Disable WMM Advertise : Off On Enable Wireless Multicast Forwarding (WMF) : Off On Max Clients : (1 ~ 128) Helpful Hints... By default these options need not be changed for this router to operate with Wireless. For the option Transmit Power is the radio signal strength. You will need to decrease the power if you add an new high gain antenna, as this will exceed operating limits. More...   Copyright © 2008-2011 D-Link Systems, Inc.
Home > Screenshots > Dlink > DSL-2750U > Wireless Advanced Settings