WAN General Setup for the DrayTek Vigor 2820nRouter Sceenshot

Back to the DrayTek Vigor 2820n



Screenshots from PortForward.com


WAN >> General Setup General Setup WAN1 Enable: Yes No Display Name: Physical Mode: ADSL Physical Type: Auto negotiation 10M half duplex 10M full duplex 100M half duplex 100M full duplex Load Balance Mode: Auto Weight According to Line Speed    Line Speed(Kbps): DownLink  UpLink  Active Mode: Always On Active on demand    Active on demand:     WAN2 Fail     WAN2 Upload speed exceed Kbps        WAN2 Download speed exceed Kbps WAN2 Enable: Yes No Display Name: Physical Mode: Ethernet Ethernet ADSL Physical Mode: Ethernet 3G USB Modem Physical Type: Auto negotiation 10M half duplex 10M full duplex 100M half duplex 100M full duplex Load Balance Mode: Auto Weight According to Line Speed    Line Speed(Kbps): DownLink  UpLink  Active Mode: Always On Active on demand    Active on demand:     WAN1 Fail     WAN1 Upload speed exceed Kbps        WAN1 Download speed exceed Kbps Note : WAN2 and LAN P1 P4 share the P1 port. When WAN2 is enabled, P1 is used as WAN2.
Home > Screenshots > DrayTek > Vigor 2820n > WAN General Setup