Back to the Dynex WRTB-239GN

---

WAN > Connection Type   Home | Help | Logout     Internet Status: Connected    LAN Setup     LAN Settings     DHCP Client List    Internet WAN     Connection Type     DNS     MAC Address    Wireless     Channel and SSID     Security     Wi-Fi Protected Setup     Use as Access Point     MAC Address Control    Firewall     Virtual Servers     Client IP Filters     DMZ     DDNS     WAN Ping Blocking     Security Log    Utilities     Restart Router     Restore Factory Default     Save/Backup Settings     Restore Previous Settings     Firmware Update     System Settings    WAN > Connection Type     Select your connection type: Dynamic   A Dynamic type of connection is the most common. If you use a cable modem, then most likely you will have a dynamic connection. If you have a cable modem or you are not sure of your connection type, use this. Static   A Static IP address connection type is less common than others. Use this selection only if your ISP gave you an IP address that never changes. PPPoE   If you use a DSL modem and/or your ISP gave you a User Name and Password, then your connection type is PPPoE. Use this connection type.     ">