IP QoS for the ECI B-FOCuS 312-TRRouter Sceenshot

Back to the ECI B-FOCuS 312-TR



Screenshots from PortForward.com


IP QoS IP QoS Entries in this table are used to assign the precedence for each incoming packet based on physical LAN port, TCP/UDP port number, and source/destination IP address/subnet masks. IP QoS: Disabled   Enabled Default QoS:  IP Pred 802.1p       Specify Traffic Classification Rules Source IP:        Netmask: Port: Destination IP: Netmask: Port: Protocol:         TCP UDP ICMP         Physical Port: LAN0   Assign Priority and/or IP Precedence and/or Type of Service and/or DSCP Outbound Priority: p3(lowest) p2 p1 p0(highest) 802.1p: 0 1 2 3 4 5 6 7 Precedence:   0 1 2 3 4 5 6 7 TOS:   Normal Service Minimize Cost Maximize Reliability Maximize Throughput Minimize Delay IP Precedence: 0 1 2 3 4 5 6 7 IP Type of Service: Normal Service Minimize Cost Maximize Reliability Maximize Throughput Minimize Delay IP QoS Rules: Traffic Classification Rules Mark Select Src IP Src Port Dst IP Dst Port Protocol Lan Port Priority IP Precd IP ToS Wan 802.1p