Internet Setup for the Eltel ET-5300Router Sceenshot

Back to the Eltel ET-5300



Screenshots from PortForward.com


  WAN Transfer Mode     Transfer Modes : ATM "yes" --> ATM VC       Virtual Circuit : PVC 0 1 2 3 4 5 6 7     Status : Activated Deactivated     VPI : (range: 0~255)     VCI : (range: 32~65535) QoS       ATM QoS : ubr cbr rt-vbr nrt-vbr     PCR : cells/second     SCR : cells/second     MBS : cells IPv4/IPv6     IP Version : IPv4 IPv4/IPv6 IPv6 Encapsulation     ISP : Dynamic IP Address       Static IP Address       PPPoA/PPPoE       Bridge Mode 802.1q     802.1q : Activated Deactivated     VLAN ID : (range: 0~4095) 802.1X   802.1X Authentication       802.1X : Disable Enable     EAP Identity :     EAP Method : EAP-TLS     Enable Bidirectional Authentication     Certificate :     Trusted CA : Dynamic IP   IP Common Options       Encapsulation : 1483 Bridged IP LLC 1483 Bridged IP VC-Mux 1483 Routed IP LLC(IPoA) 1483 Routed IP VC-Mux   Bridge Interface : Activated Deactivated   Default Route : Yes No   TCP MTU Option : TCP MTU(0:default) bytes IPv4 Options     NAT : Enable Disabled   Dynamic Route : RIP1 RIP2 Direction None Both IN Only OUT Only   IGMP Proxy : Enable Disable IPv6 Address     IPv6 Message Fetch Type : Dynamic Mode   DHCP IPv6 Enable : DHCP SLAAC   Privacy Address : Enable Disable   DHCP PD Enable : Enable Disable   MLD Proxy : Enable Disable Dual Stack Lite     Enable : Enable Disable   Mode : Auto Manual   Remote IPv6 Address : Static IP   IP Common Options     Encapsulation : 1483 Bridged IP LLC 1483 Bridged IP VC-Mux 1483 Routed IP LLC(IPoA) 1483 Routed IP VC-Mux   Bridge Interface : Activated Deactivated   Default Route : Yes No   TCP MTU Option : TCP MTU(0:default) bytes IPv4 Options     Static IP Address :   IP Subnet Mask :   Gateway :   NAT : Enable Disabled   Dynamic Route : RIP1 RIP2 Direction None Both IN Only OUT Only   IGMP Proxy : Enable Disable IPv6 Options     IPv6 Message Fetch Type : Static Mode     IPv6 Address :  /      IPv6 Default Gateway :     IPv6 DNS Server1 :     IPv6 DNS Server2 :   MLD Proxy : Enable Disable Dual Stack Lite     Enable : Enable Disable   Mode : Manual   Remote Address : PPPoE/PPPoA     Username :         The domain name is invalid. Please check!   Password :   Encapsulation : PPPoE LLC PPPoE VC-Mux PPPoA LLC PPPoA VC-Mux     PPP Authentication : AUTO PAP CHAP   Bridge Interface : Activated Deactivated Connection Setting     Connection : Always On (Recommended)       Connect On-Demand (Close if idle for minutes)       Connect Manually   TCP MSS Option : TCP MSS(0 means use default) bytes IP Options   IP Common Options     Default Route : Yes No IPv4 Options     Get IP Address : Static Dynamic   Static IP Address :   IP Subnet Mask :   Gateway :   NAT : Enable Disabled   Dynamic Route : RIP1 RIP2 Direction None Both IN Only OUT Only   TCP MTU Option : TCP MTU(0 means use default:1492) bytes   IGMP Proxy : Enable Disabled IPv6 Options     DHCP IPv6 Mode : DHCP SLAAC   Privacy Address : Enable Disable   DHCP PD Enable : Enable Disable   MLD Proxy : Enable Disable Dual Stack Lite     Enable : Enable Disable   Mode : Auto Manual   Remote Address : Bridge Mode     Encapsulation : 1483 Bridged Only LLC 1483 Bridged Only VC-Mux          
Home > Screenshots > Eltel > ET-5300 > Internet Setup