Back to the FRITZ WLAN 7340

---

FRITZ!Box   Log off Expert Mode: Standard Contents Help Overview Internet Online Monitor Online Monitor Account information Account information Child Protection Child Protection Permit Access Permit Access DSL Information DSL Information Telephony Home Network WLAN DECT System Wizards Configuration, Updates, Telephones Account Information Settings Provider Services Enter your account information here. Currently establishing a connection to the Internet via the mobile telephone network. For these settings and how to disable the mobile telephone network mode, see the "Mobile Telephone Network" page. Connection Select whether your Internet connection should be established via DSL or LAN. Internet connection via DSL Select this kind of connection if FRITZ!Box is to connect directly using your DSL line. Internet connection via LAN 1 Select this kind of connection if FRITZ!Box is to be connected to an already existing network (LAN), a cable modem or a DSL router. Operating Mode Operating Mode   Use one Internet connection for all computers (router) All connected network devices share one connection to the Internet   Use FRITZ!Box as a DSL modem Each connected computer establishes its own Internet connection using its own access software Account Information Specify whether account information such as a "User name" and "Password" is required for Internet access.   Account information required (PPPoE/PPPoA connection)   No account information required (in accordance with RFC 1483/RFC2684) Specify whether FRITZ!Box is to establish an Internet connection itself or share an existing Internet connection.   Establish own Internet connection (NAT router with PPPoE or IP)   Share existing Internet connection in the network (IP client) Account Information Specify whether account information such as a "User name" and "Password" is required for Internet access.   Account information required (PPPoE)   No account information required (IP) Connection settings Currently FRITZ!Box is using different IP settings at each interface. In this mode the option "Internet connection via LAN 1 - Use existing Internet connection in the network (IP client)" is not available. If you would like to use this mode, first enable the option "All computers are located in the same network" in the menu by clicking " System / Network Settings / IP Addresses ". Select your Internet Service Provider: XS4ALL other Internet Service Provider User Name 1und1/ @online.de Anschlusskennung (Line ID) T-Online-Nummer Mitbenutzersuffix PIN PIN confirmation Password Password confirmation Realm   Internet connection without a PIN   Internet Connection with a PIN 15-digit PIN:    Support for Telenode Platin and Telenode Titan (If one of these services is used, this option must be enabled!)   Maintain Internet connection permanently   Delay disconnection by provider to the period between 0-1 1-2 2-3 3-4 4-5 5-6 6-7 7-8 8-9 9-10 10-11 11-12 12-13 13-14 14-15 15-16 16-17 17-18 18-19 19-20 20-21 21-22 22-23 23-24   .   Clear Internet connection automatically after    seconds. FRITZ!Box works as a DSL modem and does not establish an Internet connection of its own. All connected network devices establish their own Internet connections. Note: Internet telephony is only possible in the "Use one Internet connection for all computers (router)" operating mode.   Enable filter for DSL modem (recommended) When this option is enabled, only PPPoE packets are transmitted over DSL. There is no chance that packets can be transferred from files and printers released for sharing with Internet users. If this option is disabled, all data packets will be transmitted via DSL. All computers must be located in the same IP network. DSL ATM Settings   Detect all ATM settings automatically   Define ATM settings manually VPI VCI The values for the following ATM settings are supplied by your DSL provider. VPI VCI Encapsulation   Bridged (Routed Bridge Encapsulation)   Obtain the IP address automatically (DHCP) DHCP host name     Routed IP LLC NLPID (ISO)   Routed IP LLC Snap   Routed IP Raw IP address Subnet mask Default gateway Primary DNS server Secondary DNS server FRITZ!Box MAC address: BC:05:43:30:AA:A1 Enter here the IP settings to be used in your network. Careful: After changes to these settings are applied, the FRITZ!Box user interface can be reached only via the configured IP address or the IP address assigned by the DHCP server.   Obtain the IP address automatically (DHCP) DHCP host name     Configure the IP address manually IP address Subnet mask Default gateway Primary DNS server Secondary DNS server Enter the IP settings here.   Obtain the IP address automatically (DHCP) DHCP host name     Configure the IP address manually IP address Subnet mask Default gateway Primary DNS server Secondary DNS server Prioritization of the network devices requires data about the speed of your DSL line:   Set the speeds of the DSL line automatically   Set the speeds of the DSL line manually Upstream kBit/s Downstream kBit/s Configure the speed of your DSL line. These values are required to secure the prioritization of the network devices. Upstream kBit/s Downstream kBit/s   Externes VDSL2-Modem benutzen VLAN-ID   DSL ATM Settings Please note that manual settings are required only in special cases. Your DSL provider can tell you which values are required.   Detect all ATM settings automatically   Define ATM settings manually VPI VCI Encapsulation   PPPoE   PPPoA/LLC   PPPoA/VC-Mux FRITZ!Box MAC address If your Internet Service Provider expects a special MAC address, enter it here MAC address: : : : : :   Check the Internet connection after "Apply" has been clicked