Fastest Genexis DRG700 Router Port Forwarding Instructions

Thumbnail image of Port Forward Staff
Port Forward Staff
May 24, 2017 (Last Updated: ) | Reading Time: 5 minutes

This Genexis DRG700 router has a firewall. The firewall protects your home network from unwanted Internet access. The firewall does this by blocking all incoming and outgoing connections (ports) that have not been authorized. Some online games and programs require additional ports to be opened for optimal performance. In order to allow these ports to be opened you need to create a port forward.

In this guide I will be showing you how to properly open a port or ports on your Genexis DRG700 router. These steps are:

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

NordVPN birthday deal!

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

TIP: Write this static IP address down. You need it a little later in the port forwarding process.

Step 2

Time to login to the Genexis DRG700 router. Your router along with most others require a web browser to interact with the router interface. You need to open up a web browser. It normally doesn't matter which one. I recommend choosing one you are the most familiar with such as Chrome, Internet Explorer, Edge, or Firefox.

Once you have opened the web browser of choice, find the address bar. The address bar is typically located at the top of the page like this:

Image of a browser address bar
Browser address bar

Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.

The default Genexis DRG700 IP Address is: 192.168.1.254

Once you have entered the router's IP address, press the Enter key. If the IP address was correct you should get an authentication page like this:

Genexis DRG700 default login
Screenshot of Genexis DRG700 default login.

If you did not get an image similar to the one above, you need to find out what the router's IP address has been changed to. To do this follow our guide titled How To Find Your Router's IP Address.

This gives you a page that asks for a username and password.

Having Trouble?

If the default values for the Genexis DRG700 router did not work, there are a few things you can try:

  • I first recommend trying other default Genexis usernames and passwords. A slightly different firmware version may also have a different username and/or password. Here is our list of the Default Genexis Router Passwords.
  • If the above option did not help then it is likely you or someone else has changed the router's username and/or password. You can either try and guess what the name was changed to or use our Find Router Password App. Our app does the guessing for you, making owning a router much easier.
  • If you are still unable to access your router interface you may need to consider a factory reset. A reset like this one erases all previously changed settings (including the username and password). The problem with a reset is that you have to completely reconfigure your router afterwards. I do not recommend a reset unless you have exhausted all your other troubleshooting options.

Step 3

It is now time to find the port forwarding section of the device. To help you with this step, we start on the System Information page:

Genexis DRG700 System Information
Screenshot of Genexis DRG700 System Information.

On this first page you need to click the Network option at the top of the page.

Genexis DRG700 Internet Service Configuration
Screenshot of Genexis DRG700 Internet Service Configuration.

You should now see a page like the one above. Click the smaller sub-link of Port Forward.

Genexis DRG700 Port Forwarding Configuration
Screenshot of Genexis DRG700 Port Forwarding Configuration.

On this new page, you need to click the option of Add New Rule.

Genexis DRG700 Port Forwarding Configuration Add New Rule
Screenshot of Genexis DRG700 Port Forwarding Configuration Add New Rule.

You are now on the correct page to make a port forward entry.

Step 4

Here are the ports to forward for Xbox Live:

  • TCP Ports: 3074
  • UDP Ports: 3074

If you are looking for the ports for a different application you can find it by either:

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Put a name for this forward in the Service Name box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

Put the same port number into both the Public Ports and the Local Ports boxes.

You need to enter the IP address that you are forwarding ports to in the Local IP Address box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

In the Protocol box select the protocol that you want to forward these ports over.

When you are done click the Save New Rule button.

Don't forget to click the Save New Rule after each entry is complete.

Test Your Ports

After you have finished port forwarding on the Genexis DRG700 router you should test them to see if the forwarded properly. In order to do this I recommend using our Open Port Checker. It is a reliable and totally free to use. Our port checker uses a local application to see if your ports are open. This makes our port checker guaranteed to have accurate results.

More Info...

If you are still struggling to get your ports forwarded, how about using our Port Forwarding Software. We believe getting your ports forwarded should be easy and with our software it can be. Our port forwarding software will troubleshoot, diagnose, and fix all your port forwarding issues.

Here at portforward.com we have more than just port forwarding guides. Check out our networking, software, and gaming guides here. We are your online computer source.

Are you more interested in setting up a secure router, tailored to your needs? Check out our site, setuprouter.com.

More From Portforward