Virtual Server for the Hawking HAWNR1Router Sceenshot

Back to the Hawking HAWNR1



Screenshots from PortForward.com


HawkingTech - HAWNR1 Hi-Gain™ Wireless-150N Router with Range Amplifier HAWNR1   Quick Setup General Setup Status Tools System Time Zone Password Settings Remote Management Internet Connection DNS DDNS Local Network Wireless Network Basic Settings Advanced Settings Security Settings Access Control WPS QoS NAT Port Forwarding Virtual Server Special Applications UPnP Settings ALG Settings Firewall Access Control URL Blocking DoS DMZ Virtual Server You can configure the Hi-Gain™ Wireless-150N Router with Range Amplifier as a Virtual Server so that remote users accessing services such as the Web or FTP at your local site via Public IP Addresses can be automatically redirected to local servers configured with Private IP Addresses. In other words, depending on the requested service (TCP/UDP) port number, the Wireless-150N Router redirects the external service request to the appropriate internal server (located at one of your LAN's Private IP Address). Note: This service may not function properly if your Hi-Gain™ Wireless-150N Router with Range Amplifier is behind another firewall. Enable Virtual Server ------------ ----------- Both TCP UDP     Current Virtual Server Table No. Computer Name Private IP Private Port Type Public Port Comment Select                 © 2010 Hawking Technologies, Inc. All rights reserved.
Home > Screenshots > Hawking > HAWNR1 > Virtual Server