Virtual Server for the Hawking HW2R1Router Sceenshot

Back to the Hawking HW2R1



Screenshots from PortForward.com


HawkingTech - HW2R1 Hi-Gain™ Wireless-N Dual Radio Smart Repeater HW2R1   Quick Setup General Setup Status Tools System Time Zone Password Settings Remote Management Internet Connection DNS DDNS Home Network Home Wireless Basic Settings Advanced Settings Security Settings Access Control WPS QoS NAT Port Forwarding Virtual Server Special Applications UPnP Settings ALG Settings Firewall Access Control URL Blocking DoS DMZ Virtual Server You can configure the Hi-Gain™ Wireless-N Dual Radio Smart Repeater as a Virtual Server so that remote users accessing services such as the Web or FTP at your local site via Public IP Addresses can be automatically redirected to local servers configured with Private IP Addresses. In other words, depending on the requested service (TCP/UDP) port number, the Hi-Gain™ Wireless-N Dual Radio Smart Repeater redirects the external service request to the appropriate internal server (located at one of your LAN's Pirvate IP Address). Note: This service may not function properly if your Hi-Gain™ Wireless-N Dual Radio Smart Repeater is behind another firewall. Enable Virtual Server Private IP Computer Name Private Port Type Public Port Comment ------ Select------ ----- Refresh------ Both TCP UDP     Current Virtual Server Table No. Computer Name Private IP Private Port Type Public Port Comment Select                 © 2009 Hawking Technologies, Inc. All rights reserved.
Home > Screenshots > Hawking > HW2R1 > Virtual Server