Advanced Routing for the Linksys BEFSR81v3Router Sceenshot

Back to the Linksys BEFSR81v3



Screenshots from PortForward.com


Administration Firmware Version: 2.50.2    Setup Etherfast® Cable/DSL Router  BEFSR81 V3   Setup Security Applications & Gaming Administration Status      Basic Setup   DDNS   MAC Address Clone   Advanced Routing Advanced Routing                 NAT     Enable  Disable     Dynamic Routing -->     Enable  Disable            Transmit RIP Version:   Disabled --> RIP1 RIP1-Compatible RIP2           Receive RIP Version:   Disabled --> RIP1 RIP2                 Static Routing     Select Entry:   1 --- 2 --- 3 --- 4 --- 5 --- 6 --- 7 --- 8 --- 9 --- 10 --- 11 --- 12 --- 13 --- 14 --- 15 --- 16 --- 17 --- 18 --- 19 --- 20 ---                                    Destination IP Address:   . . .           Subnet Mask:   . . .           Gateway:   . . .           Hop Count:             Interface:   LAN Internet                                           Routing NAT is Network Address Translation, which allows multiple computers to share one Internet connection. You can turn off NAT by selecting the Disable option. By default, NAT is set to Enable . The Dynamic Routing feature can be used to automatically adjust to physical changes in the network's layout. The Router uses the dynamic RIP protocol. It determines the route that the network packets take based on the fewest number of hops between the source and the destination. The RIP protocol regularly broadcasts routing information to other routers on the network. More...                       Save Settings   Cancel Changes    
Home > Screenshots > Linksys > BEFSR81v3 > Advanced Routing