Basic Setup for the Linksys BEFSR81v3Router Sceenshot

Back to the Linksys BEFSR81v3



Screenshots from PortForward.com


Setup Firmware Version: 2.50.2    Setup Etherfast® Cable/DSL Router  BEFSR81 V3   Setup Security Applications & Gaming Administration Status      Basic Setup   DDNS   MAC Address Clone   Advanced Routing Internet Setup                 Internet Connection Type     Obtain an IP automatically Static IP PPPoE RAS (for SingTel) PPTP Heart Beat Signal L2TP          IP Address:   . . .        Subnet Mask:   . . .        Default Gateway:   . . .        Static DNS 1:   . . .        Static DNS 2:   . . .        Static DNS 3:   . . .               Optional Settings (required by some ISPs)      Host Name:              Domain Name:              MTU:   Enable Disable   Size:               Network Setup             Router IP      Local IP Address:   . . .            Subnet Mask:   255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252               Network Address Server Settings (DHCP)      Local DHCP Server:   Enable Disable            Start IP Address:       192.168.1.            Number  of  Address:              DHCP  Address  Range:  192.168.1.100   to   192.168.1.149            Client Lease Time:    minutes (0 means one day)            WINS:   . . .                 Basic Setup The Basic Setup screen is where basic configuration is performed. Some ISPs (Internet Service Providers) will require that you enter the DNS information. These settings can be obtained from your ISP. After you have configured these settings, you should set a router password from the Administration->Management screen. Completing the Internet Setup section is all that is required to set up for your specific ISP. Please look at the table below to configure the Router for your Internet connection. More...                       Save Settings   Cancel Changes    
Home > Screenshots > Linksys > BEFSR81v3 > Basic Setup