Filter for the Linksys BEFSR81v3Router Sceenshot

Back to the Linksys BEFSR81v3



Screenshots from PortForward.com


Security Firmware Version: 2.50.2    Security Etherfast® Cable/DSL Router  BEFSR81 V3   Setup Security Applications & Gaming Administration Status      Filter     VPN Passthrough Filter IP Address Range             NUM       Start    End               1:   192.168.1.   to           2:   192.168.1.   to           3:   192.168.1.   to           4:   192.168.1.   to           5:   192.168.1.   to         Filter Port Range                       NUM Protocol     Start        End             1:   TCP UDP Both      to             2:   TCP UDP Both      to             3:   TCP UDP Both      to             4:   TCP UDP Both      to             5:   TCP UDP Both      to             Filter MAC Address     Block WAN Requests     Block Anonymous Internet Requests: Enabled  Disabled         Filter Multicast: Enabled  Disabled         Filter Internet NAT Redirection: Enabled Disabled          Filter IDENT(Port 113): Enabled Disabled            Filters By using the Filters screen, you can configure the Router to block specific internal users from accessing the Internet. You can set up different filters for different users based on their IP addresses, MAC addresses, and their services port numbers. To set Filter IP Address Range , do the following: Enter the range of IP addresses that you want to filter into the IP address range fields. The users who have these IP addresses will not be able to access the Internet. Click the Save Settings button to save any changes. To set Filter Port Range , do the following: You can filter users by entering their services port numbers. More...                   --> Save Settings   --> Cancel Changes