Port Range Forwarding for the Linksys BEFSR81v3Router Sceenshot

Back to the Linksys BEFSR81v3



Screenshots from PortForward.com


Application & Gaming Firmware Version: 2.50.2    Applications & Gaming Etherfast® Cable/DSL Router  BEFSR81 V3   Setup Security Applications & Gaming Administration Status      Port Range Forwarding   Port Triggering   UPnP Forwarding   DMZ   QoS Port Range Forwarding                       Port Range Application Start End Protocol IP Address Enabled    to TCP UDP Both 192.168.1.    to TCP UDP Both 192.168.1.    to TCP UDP Both 192.168.1.    to TCP UDP Both 192.168.1.    to TCP UDP Both 192.168.1.    to TCP UDP Both 192.168.1.    to TCP UDP Both 192.168.1.    to TCP UDP Both 192.168.1.    to TCP UDP Both 192.168.1.    to TCP UDP Both 192.168.1.     Port Range Forwarding Port Range Forwarding can be used to set up public services on your network. When users from the Internet make certain requests on your network, the Router can forward those requests to computers equipped to handle the requests. If, for example, you set the port number 80 (HTTP) to be forwarded to IP Address 192.168.1.2, then all HTTP requests from outside users will be forwarded to 192.168.1.2. It is recommended that the computer use static IP address. You may use this function to establish a web server or FTP server via an IP Gateway. Be sure that you enter a valid More...                       --> Save Settings   --> Cancel Changes    
Home > Screenshots > Linksys > BEFSR81v3 > Port Range Forwarding