Port Range Forwarding for the Linksys BEFW11S4v4-1.52Router Sceenshot

Back to the Linksys BEFW11S4v4-1.52



Screenshots from PortForward.com


Application & Gaming Firmware Version: 1.52.02   Applications & Gaming Wireless-B Broadband Router  BEFW11S4   Setup Wireless Security Applications & Gaming Administration Status Port Range Forwarding   Port Triggering   UPnP Forwarding   DMZ Port Range Forwarding                       Port Range Application        Start       to End Protocol IP Address Enable       to TCP UDP Both 192.168.1.       to TCP UDP Both 192.168.1.       to TCP UDP Both 192.168.1.       to TCP UDP Both 192.168.1.       to TCP UDP Both 192.168.1.       to TCP UDP Both 192.168.1.       to TCP UDP Both 192.168.1.       to TCP UDP Both 192.168.1.       to TCP UDP Both 192.168.1.       to TCP UDP Both 192.168.1.     Port Range Forwarding Port Range Forwarding can be used to set up public services on your network. When users from the Internet make certain requests on your network, the Router can forward those requests to computers equipped to handle the requests. If, for example, you set the port number 80 (HTTP) to be forwarded to IP Address 192.168.1.2, then all HTTP requests from outside users will be forwarded to 192.168.1.2. It is recommended that the computer use static IP address. You may use this function to establish a web server or FTP server via an IP Gateway. Be sure that you enter a valid More...                       --> Save Settings   --> Cancel Changes    
Home > Screenshots > Linksys > BEFW11S4v4-1.52 > Port Range Forwarding