UPnP Forwarding for the Linksys BEFW11S4v4-1.52Router Sceenshot

Back to the Linksys BEFW11S4v4-1.52



Screenshots from PortForward.com


Application & Gaming Firmware Version: 1.52.02   Applications & Gaming Wireless-B Broadband Router  BEFW11S4   Setup Wireless Security Applications & Gaming Administration Status Port Range Forwarding   Port Triggering   UPnP Forwarding   DMZ UPnP Forwarding             Application Ext.Port TCP  UDP Int.Port IP Address Enabled FTP 21     Telnet 23     SMTP 25     DNS 53     TFTP 69     finger 79     HTTP 80     POP3 110     NNTP 119     SNMP 161                               UPnP Forwarding UPnP Forwarding can be used to set up public services on your network. When users from the Internet make certain requests on your network, the Router can forward those requests to computers equipped to handle the requests. If, for example, you set the port number 80 (HTTP) to be forwarded to IP Address 192.168.1.2, then all HTTP requests from outside users will be forwarded to 192.168.1.2. It is recommended that the computer use static IP address. You may use this function to establish a Web server or FTP server via an IP Gateway. In this format, Windows XP can be used to configure this through UPnP communication.Be sure that you enter a valid IP Address. (You may need to establish a static IP address with your ISP in order to properly run an Internet server.) For added security, More...                   --> Save Settings   --> Cancel Changes    
Home > Screenshots > Linksys > BEFW11S4v4-1.52 > UPnP Forwarding