Network for the Linksys RV042Router Sceenshot

Back to the Linksys RV042



Screenshots from PortForward.com


Web Management      Firmware Version: 1.2.3     Setup 10/100 4-port VPN Router     RV042 System Summary Setup DHCP System Management Firewall VPN Log Wizard Support Logout network--> Network network--> Password Time DMZ Host Forwarding UPnP One-to-One NAT   More... >>   Network             The Setup screen contains all of the router's basic setup functions. The device can be used in most network settings without changing any of the default values. Some users may need to enter additional information in order to connect to the Internet through an ISP (Internet Service Provider) or broadband (DSL, cable modem) carrier. Host Name & Domain Name: Enter a host and domain name for the Router. Some ISPs (Internet Service Providers) may require these names as identification, and these settings can be obtained from your ISP. In most cases, leaving these fields blank will work. LAN Setting: This is the Router's LAN IP Address and Subnet Mask. The default value is 192.168.1.1 for IP address and 255.255.255.0 for the Subnet Mask. More...         Host Name: (Required by some ISPs)   Domain Name: (Required by some ISPs) LAN Setting     (MAC Address: 00-0c-41-91-f6-7e )   Device IP Address Subnet Mask   . . . 255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252   Dual-WAN / DMZ Setting       Dual WAN DMZ   WAN Connection Type     Obtain an IP automatically Static IP PPPoE PPTP    Use the Following DNS Server Addresses: DNS Server (Required) 1: . . . 2: . . .      Specify WAN IP Address: . . . Subnet Mask: . . . Default Gateway Address: . . . DNS Server (Required) 1: . . . 2: . . . -->      User Name: Password: Connect on Demand: Max Idle Time Min. Keep Alive: Redial Period Sec. -->      Specify WAN IP Address: . . .   Subnet Mask: . . .   Default Gateway Address: . . .   User Name: Password: Connect on Demand: Max Idle Time Min. Keep Alive: Redial Period Sec. --> Obtain an IP automatically Static IP PPPoE PPTP    Use the Following DNS Server Addresses: DNS Server (Required) 1: . . . 2: . . .      . . . Subnet Mask: . . . --> Default Gateway Address: . . . DNS Server (Required) 1: . . . 2: . . . --> Public IP Address Add Range   From Address To Address     . . .        . . .       -->      User Name: Password: Connect on Demand: Max Idle Time Min. Keep Alive: Redial Period Sec. -->      Specify WAN IP Address: . . .   Subnet Mask: . . .   Default Gateway Address: . . .   User Name: Password: Connect on Demand: Max Idle Time Min. Keep Alive: Redial Period Sec. -->     Save Settings   Cancel Changes  
Home > Screenshots > Linksys > RV042 > Network