Advanced Routing for the Linksys RV082Router Sceenshot

Back to the Linksys RV082



Screenshots from PortForward.com


Web Management      Firmware Version: 1.0.2     Setup 10/100 8-port VPN Router     RV082 System Summary Setup DHCP System Management LAN Management Firewall VPN Log Wizard Support Logout MAC Clone DDNS adv_dynamic--> Advanced Routing adv_dynamic-->   Back...   Advanced Routing         Dynamic Routing The Router's dynamic routing feature can be used to automatically adjust to physical changes in the network's layout. The Router uses the dynamic RIP protocol. It determines the route that the network packets take based on the fewest number of hops between the source and the destination. The RIP protocol regularly broadcasts routing information to other routers on the network. Working Mode: Select Gateway mode if your Router is hosting your network's connection to the Internet. Select Router mode if the Router exists on a network with other routers, including a separate network gateway that handles the Internet connection. More...       Dynamic Routing     Working Mode:     Gateway Router RIP:     Enabled   Disabled Receive RIP versions:     None RIPv1 RIPv2 Both RIP v1 and v2 Transmit RIP versions:     None RIPv1 RIPv2 - Broadcast RIPv2 - Multicast Static Routing             Destination IP:     . . .     Subnet Mask:     . . .     Default Gateway:     . . .     Hop Count   (Metric, max. is 15):         interface:     LAN WAN1 WAN2/DMZ                 Show Routing Table   Save Settings   Cancel Changes  
Home > Screenshots > Linksys > RV082 > Advanced Routing