LAN Setup for the Linksys SPA-2100Router Sceenshot

Back to the Linksys SPA-2100



Screenshots from PortForward.com


Sipura SPA Configuration Router Voice   Status Wan Setup Lan Setup Application User Login      basic   |  advanced   Product Information Product Name: SPA-2100 Serial Number: 0 00000000000 Software Version: 2.0.5(c) Hardware Version: 1.0.0(99e2) MAC Address: 000000000000 Client Certificate: Installed   System Status Current Time: 1/1/2003 12:58:29 Elapsed Time: 00:58:29 Wan Connection Type: DHCP Current IP: 192.168.1.11 Host Name: SipuraSPA Domain: Current Netmask: 255.255.255.0 Current Gateway: 192.168.1.1 Primary DNS: 192.168.1.1 Secondary DNS: LAN IP Address: 192.168.0.1 Broadcast Pkts Sent: 10 Broadcast Bytes Sent: 3420 Broadcast Pkts Recv: 31524 Broadcast Bytes Recv: 2065732 Broadcast Pkts Dropped: 0 Broadcast Bytes Dropped: 0   Internet Connection Settings Connection Type: DHCP Static IP PPPOE   Static IP Settings Static IP: NetMask: Gateway:   PPPoE Settings PPPoE Login Name: PPPoE Login Password: PPPoE Service Name:   Optional Settings HostName: Domain: Primary DNS: Secondary DNS: DNS Server Order: Manual Manual,DHCP DHCP,Manual DNS Query Mode: Parallel Sequential Primary NTP Server: Secondary NTP Server:   MAC Clone Settings Enable MAC Clone: yes no Cloned MAC Address:   Remote Management Enable WAN Web Server: yes no WAN Web Server Port:   QOS Settings QOS QDisc: NONE CBQ TBF Maximum Uplink Speed: (Kbps)   VLAN Settings Enable VLAN: yes no VLAN ID: [0x000-0xFFF]   LAN Network Settings LAN IP Address: LAN IP Netmask: 255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252   Enable DHCP Server: yes no DHCP Lease Time: Hours DHCP Client Starting IP Address: 192.168.0. Number of Client IP Addresses:   Static DHCP Lease Settings Enable Host Mac Address Host IP Address   yes no 192.168.0.    yes no 192.168.0.    yes no 192.168.0.    yes no 192.168.0.    yes no 192.168.0.    yes no 192.168.0.    yes no 192.168.0.    yes no 192.168.0.    yes no 192.168.0.    yes no 192.168.0.      Port Forwarding Settings Enable Service Name Starting Port Ending Port Protocol Server IP Address yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.  yes no TCP UDP Both 192.168.0.    DMZ Settings Enable DMZ: yes no DMZ Host IP: 192.168.0.   System Reserved Ports Range Starting Port: (+10000) Num of Ports Reserved: 256 512 1024       User Login      basic   |  advanced Copyright 2003-2005 Sipura Technology. All Rights Reserved.
Home > Screenshots > Linksys > SPA-2100 > LAN Setup