Basic Wireless Settings for the Linksys WAG160NRouter Sceenshot

Back to the Linksys WAG160N



Screenshots from PortForward.com


Firmware Version:V1.00.08 Wireless Wireless-N ADSL2+ Gateway WAG160N Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Basic Wireless Settings | Wireless Security | Wireless MAC Filter | Advanced Wireless Settings Basic Wireless Settings Help... Wireless Configuration: Manual Wi-Fi Protected Setup Network Mode: Network Name (SSID): Radio Band: Wide Channel: Standard Channel: SSID Broadcast: Enable Disable Wi-Fi Protected SetupTM Use one of the following for each Wi-Fi Protected Setup supported device: 1. If your client device has a Wi-Fi Protected Setup button, click or press that button, and then click the button on the right. OR 2. If your client device has a Wi-Fi Protected Setup PIN number, enter that number here and then click OR 3. If your client asks for the Gateway's PIN number, enter this number 36049134 in your client device. Wi-Fi Protected Setup Status: Configured Network Name (SSID): 56789 Security: RADIUS Passphrase: 1234567890 Cisco Logo Searching for your client device. Please wait... If you have not clicked on the Wi-Fi Protected Setup button on your client device, please do so now. Connecting your client device to your network. Please wait... Congratulations! Your client device is now securely connected to your network. Refer back to your client device for further instructions. Press "OK" to continue. Connection Failure! Your client device failed to connect to the network. Refer back to your client device for further instructions. Press "OK" to continue.
Home > Screenshots > Linksys > WAG160N > Basic Wireless Settings