Advanced Wireless Settings for the Linksys WAG160Nv2Router Sceenshot

Back to the Linksys WAG160Nv2



Screenshots from PortForward.com


Firmware Version:V2.00.13 Wireless Wireless-N ADSL2+ Gateway WAG160Nv2 Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Basic Wireless Settings | Wireless Security | Wireless MAC Filter | Advanced Wireless Settings Advanced Wireless Help... AP Isolation: Enable Disable (Default: Disable) Authentication Type: (Default: Auto) Basic Rate: (Default: Default) Transmission Rate: (Default: Auto) N Transmission Rate: (Default: Auto) CTS Protection Mode: (Default: Disable) Beacon Interval: (Default: 100 msec, Range: 20-1000) DTIM Interval: (Default: 1, Range: 1-255) Fragmentation Threshold: (Default: 2346, Range: 256-2346) RTS Threshold: (Default: 2346, Range: 256-2346) Cisco Logo Searching for your client device. Please wait... If you have not clicked on the Wi-Fi Protected Setup button on your client device, please do so now. Connecting your client device to your network. Please wait... Congratulations! Your client device is now securely connected to your network. Refer back to your client device for further instructions. Press "OK" to continue. Connection Failure! Your client device failed to connect to the network. Refer back to your client device for further instructions. Press "OK" to continue.
Home > Screenshots > Linksys > WAG160Nv2 > Advanced Wireless Settings