Ethernet for the Linksys WAG160Nv2Router Sceenshot

Back to the Linksys WAG160Nv2



Screenshots from PortForward.com


Firmware Version:V2.00.13 Setup Wireless-N ADSL2+ Gateway WAG160Nv2 Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Basic Setup | Ethernet | DDNS | MAC Address Clone | Advanced Routing Ethernet Setup Help... 1st Ethernet Port Ethernet Connection: Use as WAN Port Use as LAN port Ethernet WAN setup Connection Internet IP Address: . . . Subnet Mask: . . . Default Gateway: . . . Static DNS 1: . . . Static DNS 2: . . . User Name: Password: Connect on Demand - Max Idle Time: minutes Keep Alive - Redial Period: seconds Service Name: Obtain an IP address Automatically Specify an IP address . . . Subnet Mask: . . . Default Gateway: . . . DNS 1: . . . DNS 2: . . . DNS 3: . . . PPTP Server IP Address: . . . User Name: Password: Connect on Demand - Max Idle Time: minutes Keep Alive - Redial Period: seconds Server IP Address: . . . Username: Password: Connect on Demand: Max Idle Time Minutes Keep Alive: Redial period Seconds Optional Settings (required by some ISPs) Domain Name: Host Name: MTU: Size: Cisco Logo Searching for your client device. Please wait... If you have not clicked on the Wi-Fi Protected Setup button on your client device, please do so now. Connecting your client device to your network. Please wait... Congratulations! Your client device is now securely connected to your network. Refer back to your client device for further instructions. Press "OK" to continue. Connection Failure! Your client device failed to connect to the network. Refer back to your client device for further instructions. Press "OK" to continue.
Home > Screenshots > Linksys > WAG160Nv2 > Ethernet