Basic Wireless Settings for the Linksys WAG54G2Router Sceenshot

Back to the Linksys WAG54G2



Screenshots from PortForward.com


Basic Wireless Settings      Firmware Version:V1.00.10 Wireless Wireless ADSL2+ Gateway WAG54G2 Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Basic Wireless Settings    | Wireless Security | Wireless MAC Filter | Advanced Wireless Settings Basic Wireless Settings       Help...   Wireless Configuration: Manual Wi-Fi Protected Setup         Network Mode: Disable Mixed B-Only G-Only Network Name (SSID): Wireless Channel: 1 - 2 .412  GHz 2 - 2 .417  GHz 3 - 2 .422  GHz 4 - 2 .427  GHz 5 - 2 .432  GHz 6 - 2 .437  GHz 7 - 2 .442  GHz 8 - 2 .447  GHz 9 - 2 .452  GHz 10 - 2 .457  GHz 11 - 2 .462  GHz 12 - 2 .467  GHz 13 - 2 .472  GHz SSID Broadcast: Enable     Disable Wi-Fi Protected Setup TM Use one of the following for each Wi-Fi Protected Setup supported device: 1. If your client device has a Wi-Fi Protected Setup button, click or press that button, and then click the button on the right. OR 2. If your client device has a Wi-Fi Protected Setup PIN number, enter that number here  and then click  OR 3. If your client asks for the Gateway's PIN number, enter this number 10574898 in your client device. Wi-Fi Protected Setup Status: Network Name (SSID): CISCO Security: Disabled Passphrase:                   Searching for your client device. Please wait...   If you have not clicked on the Wi-Fi Protected Setup button on your client device, please do so now.             Connecting your client device to your network. Please wait...             Congratulations!   Your client device is now securely connected to your network.     Refer back to your client device for further instructions.     Press " OK " to continue.       Connection Failure!   Your client device failed to connect to the network.     Refer back to your client device for further instructions.     Press " OK " to continue.      
Home > Screenshots > Linksys > WAG54G2 > Basic Wireless Settings