VPN Passthrough for the Linksys WAG54GP2Router Sceenshot

Back to the Linksys WAG54GP2



Screenshots from PortForward.com


VPN Firmware Version: 2.01.00   Security Wireless-G ADSL Gateway   --> Wireless-G ADSL2 Gateway With 2 Phone Ports   WAG54GP2   --> Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Voice      Firewall | VPN --> VPN | --> --> --> --> VPN Passthrough                   IPSec PassThrough: Enable Disable       PPPoE PassThrough: Enable Disable       PPTP PassThrough: Enable Disable       L2TP PassThrough: Enable Disable           IPSec VPN Tunnel                       Select Tunnel Entry:   1 (--) 2 (--) 3 (--) 4 (--) 5 (--)                              IPSec VPN Tunnel: Enabled      Disabled           Tunnel Name:             Local Secure Group:           IP Addr. Subnet           IP:    . . .           Mask:    . . .                   Local Security Gateway:           PVC 1(ppp0)           Local Identity Type:          IP Addr. FQDN   -->         Remote Secure Group:           IP Addr. Subnet Host Any           IP:    . . .           Mask:    . . .           Remote Security Gateway:         IP Addr. FQDN Any           IP Address:    . . .           Remote Identity Type:          IP Addr. FQDN   -->               Encryption:    DES  3DES  Disabled         Authentication:    MD5   SHA             Key Management:           Auto.(IKE) Manual           PFS: Enabled      Disabled           Pre-shared Key:               Key Lifetime:     Sec.           Status:       Disconnected                         -->                         More...                     Save Settings   Cancel Changes    
Home > Screenshots > Linksys > WAG54GP2 > VPN Passthrough