Setup for the Linksys WAP11v2.2Router Sceenshot

Back to the Linksys WAP11v2.2

Screenshots from

SETUP This screen contains all of the AP's basic setup functions. Most users will be able to use the AP's default settings without making any changes. If you require help during configuration, please see the user guide. Firmware Version:       AP Name:      LAN IP Address:       (MAC Address: 00-00-00-00-00-00 )    Obtain an IP Address Automatically    Specify an IP Address . . .    Subnet Mask: . . .    Gateway: . . .     Wireless:       (MAC Address: 00-00-00-00-00-00 )     SSID:              Channel:   1 2 3 4 5 6 7 8 9 10 11 (Domain: USA )    WEP:           Mandatory Disable       AP Mode :      Access Point      Access Point Client Remote AP MAC Address      Wireless Bridge Remote Bridge MAC Address      Wireless Bridge - Point to MultiPoint      When set to "Access Point Client", "Wireless Bridge" or "Wireless Bridge -    Point to MultiPoint" mode, the device will only communicate with another    WAP 11 ver. 2.2 or WAP 11.     Backup/Restore S etting :        Click "Backup" to store Access Point configuration on your local PC.    Click "Restore" to restore Access Point configuration from your local PC.