Basic Wireless Settings for the Linksys WAP610NRouter Sceenshot

Back to the Linksys WAP610N



Screenshots from PortForward.com


Firmware Version:  1.0.00     Wireless Wireless-N Access Point with Dual-Band Setup Wireless Administration Status Basic Wireless Settings | Wireless Security | Wireless MAC Filter | WMM | Advanced Wireless Settings Basic Wireless Settings redirect Configuration View: Manual Wi-Fi Protected Setup TM Wireless Band: --> --> --> 5 GHz 2.4 GHz 5 GHz Wireless Settings Network Mode: Mixed Wireless-A Only Wireless-N Only Network Name (SSID): Channel Width: 20 MHz Only 40 MHz Only Wide Channel: Standard Channel: SSID Broadcast: Enabled Disabled 2.4 GHz Wireless Settings Network Mode: Mixed Wireless-B/G Only Wireless-B Only Wireless-G Only Wireless-N Only Network Name (SSID): Channel Width: 20 MHz Only 40 MHz Only Wide Channel: Standard Channel: SSID Broadcast: Enabled Disabled Wi-Fi Protected Setup TM Use one of following for each Wi-Fi Protected Setup™ supported device:   1. If your client device has a Wi-Fi Protected Setup™ button,click or press that button and then click the button on the right. OR 2. If your client device has a Wi-Fi Protected Setup™ PIN number,enter that number here and then click   OR 3. If your client asks for the Router's PIN number,enter this number     in your client device. Wi-Fi Protected Setup™ Status: Unconfigured Wireless Band: Network Name (SSID): Security: Encryption: Passphrase:   --> Save Settings Cancel Changes -->
Home > Screenshots > Linksys > WAP610N > Basic Wireless Settings