Setup for the Linksys WET54GS5Router Sceenshot

Back to the Linksys WET54GS5

Screenshots from

Linksys WET54GS5 Setup --> -->  Setup   Setup   |   Password   |   Wireless   |   Switch   |   Wireless Status   |   SNMP   |   Help This screen allow changes to basic settings. Click the Apply button to save any changes. If this page does not automatically refresh after clicking Apply , then click the Refresh button of your web browser.     Firmware:       MAC Address:    -->   System Uptime:    LAN     Device Name:   You may specify a device name up to 19 characters long. Configuration   Type:     Automatic Configuration - DHCP   Static IP Address:   IP Address:  . . .   Subnet Mask:  . . .   Gateway:  . . .     The above settings will not be applied if Automatic Configuration - DHCP is selected. 802.1x:   Wireless     SSID:   --> Search for available wireless network(s). Network Type:      Infrastructure      Ad-Hoc   Channel:     Mode:   B-Only G-Only Mixed Security:   Enable   Disable      Note: All devices must use the same settings in order to communicate.          --> -->