Setup for the Linksys WET54Gv2Router Sceenshot

Back to the Linksys WET54Gv2



Screenshots from PortForward.com


Linksys WET54GV2 Setup --> -->  Setup   Setup  |   Password   |   Advanced   |   Status   |   Help This screen allow changes to basic settings. Click the Apply button to save any changes. If this page does not automatically refresh after clicking Apply , then click the Refresh button of your web browser.     Firmware:        MAC Address:      --> LAN     Device Name:   You may specify a device name up to 19 characters long. Configuration   Type:     Automatic Configuration - DHCP   Static IP Address:   IP Address:  . . .   Subnet Mask:  . . .   Gateway:  . . .     The above settings will not be applied if Automatic Configuration - DHCP is selected. Wireless     SSID:   --> Search for available wireless network(s). Network Type:      Infrastructure      Ad-Hoc   Channel: 1 2 3 4 5 6 7 8 9 10 11 -->     Mode:   B-Only --> G-Only Mixed A-Only --> WEP:   Enable   Disable      Note: All devices must use the same settings in order to communicate.          --> -->