Setup for the Linksys WMB54GRouter Sceenshot

Back to the Linksys WMB54G

Screenshots from

Setup   Setup      Setup   |   Password    |   Advanced      |   Status   |   Help This screen allow changes to basic settings. Click the Apply button to save any changes. If this page does not automatically refresh after clicking Apply , then click the Refresh button of your web browser.       Firmware:      v2.10 (Nov. 30, 2005)   Regulatory    Domain:        Device Name:       You may specify a device name up to 19 characters long. LAN       MAC Address:      00:00:00:00:00:00   Configuration Type:     Automatic Configuration - DHCP     Static IP Address       IP Address:   . . . Subnet Mask:   . . . Gateway:   . . . Wireless       MAC Address:      00:00:00:00:00:00      Note: All devices must use the same wireless settings in order to communicate.   Wireless Mode:      Disabled Infrastructure Ad-Hoc Infrastructure - If you want to connect to a wireless router or access point. Ad-Hoc - If you want to connect to another wireless device directly without using a wireless router or access point.   Wireless Network    Name (SSID):          Search for available wireless network(s).   Security:     Enabled  Disabled                -->
Home > Screenshots > Linksys > WMB54G > Setup