Advanced Routing for the Linksys WRH54GRouter Sceenshot

Back to the Linksys WRH54G



Screenshots from PortForward.com


Advanced Routing Firmware Version: v1.01.04    Setup Wireless-G Home Router     Setup Wireless Security Access Restrictions Applications & Gaming      Administration      Status      Basic Setup | --> | DDNS | MAC Address Clone | Advanced Routing | WAN Port Configure | --> | Hot Spot -->   Advanced Routing                 Operating Mode     Current Mode:  Gateway   Router               Dynamic Routing     RIP Protocol:  Disabled LAN & Wireless WAN (Internet) Both               Static Routing     Select Entry:    1 ( ) 2 ( ) 3 ( ) 4 ( ) 5 ( ) 6 ( ) 7 ( ) 8 ( ) 9 ( ) 10 ( ) 11 ( ) 12 ( ) 13 ( ) 14 ( ) 15 ( ) 16 ( ) 17 ( ) 18 ( ) 19 ( ) 20 ( )           Enter Route Name:              Destination LAN IP:    . . .           Subnet Mask:    . . .           Gateway:    . . .           Hop Count:              Interface:    LAN & Wireless WAN (Internet)                       Routing Table:                        Operating Mode: If the router is hosting your Internet connection, select Gateway mode. If another router exists on your network, select Router mode. Select Entry: This is the unique route number; you may set up to 20 routes. Route Name: Enter the name you would like to assign to this route. Destination LAN IP: This is the remote host to which you would like to assign the static route. Subnet Mask: Determines the host and the network portion. More...                     
Home > Screenshots > Linksys > WRH54G > Advanced Routing