Advanced Settings for the Linksys WRH54GRouter Sceenshot

Back to the Linksys WRH54G



Screenshots from PortForward.com


Advanced Settings Firmware Version: v1.01.04    Wireless Wireless-G Home Router     Setup Wireless Security Access Restrictions Applications & Gaming      Administration      Status      Basic Settings |   Wireless Security |   MAC Filtering | Advanced Settings | --> Advanced Wireless                       Authentication Type:  Auto Shared Key    (Default: Auto)               Basic Rate:  1-2 Mbps      Default All    (Default: Default)               Transmission Rate:  1 Mbps 2 Mbps 5.5 Mbps 6 Mbps 9 Mbps 11 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps Auto              (Default: Auto)               CTS Protection Mode:  Disable    Auto   ( Default:  Auto)               Frame Burst :  Disable    Enable   ( Default:  Disable)               Beacon Interval:    ( Default: 100 milliseconds, Range: 1 - 65535)               DTIM Interval:    ( Default: 1, Range: 1 - 255)               Fragmentation    Threshold:    ( Default: 2346, Range: 256 - 2346)               RTS Threshold:    ( Default: 2347, Range: 0 - 2347)               STA Isolation :  Off    On   ( Default:  Off)               Max STA Associations :  8    16    32    64    Best Effort      ( Default: 16 )               :        (: )     -->   Authentication Type: You may choose from Auto or Shared Key. Shared key authentication is more secure, but all devices on your network must also support Shared Key authentication. More...                     
Home > Screenshots > Linksys > WRH54G > Advanced Settings