Basic Settings for the Linksys WRH54GRouter Sceenshot

Back to the Linksys WRH54G



Screenshots from PortForward.com


Basic Settings Firmware Version: v1.01.04    Wireless Wireless-G Home Router     Setup Wireless Security Access Restrictions Applications & Gaming      Administration      Status      Basic Settings |   Wireless Security |   MAC Filtering | Advanced Settings | --> Wireless Network                   Wireless Network Mode:     Disabled Mixed B-Only G-Only           Wireless Network Name  (SSID):               Wireless Channel:     Auto 1 - 2.412GHZ 2 - 2.417GHZ 3 - 2.422GHZ 4 - 2.427GHZ 5 - 2.432GHZ 6 - 2.437GHZ 7 - 2.442GHZ 8 - 2.447GHZ 9 - 2.452GHZ 10 - 2.457GHZ 11 - 2.462GHZ           Wireless RF Control:     Standard Medium Low           Wireless SSID Broadcast:    Enable    Disable           Wireless RF Scheduling:    Enable    Disable                       0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23                         On   Off           SSID of associating AP:                Default IP of associating AP:   . . .     --> : -->               Wireless Network Mode: If you have Wireless-G and 802.11b clients in your network, then keep the default setting, Mixed . If you wish to exclude 802.11b clients, choose G-Only Mode. If you wish to exclude Wireless-G clients, choose B-Only Mode. If you would like to disable wireless access, choose Disable . Wireless RF Control: Wireless RF control allows the user to set 3 different levels of RF output. Standard - this is based on Wi-Fi RF regulation for best RF coverage. If wireless Client (STA) is quite close to the router, you may consider adjusting the RF output to "Medium" or "Low" level for reducing the RF coverage. More...                     
Home > Screenshots > Linksys > WRH54G > Basic Settings