Management for the Linksys WRH54GRouter Sceenshot

Back to the Linksys WRH54G

Screenshots from

Management --> Firmware Version: v1.01.04    Administration Wireless-G Home Router     Setup Wireless Security Access Restrictions Applications & Gaming      Administration     Status      Management | Log | Diagnostics | Factory Defaults | Firmware Upgrade | Config Management | Reboot Router Access                 Local Router Access          Router Account:         -->         Router Password:                Re-enter to  confirm:                         :    HTTP       HTTPS     -->         Wireless Web  Management Access:    Enable       Disable               Remote Router Access         Remote  Management:   Enable       Disable             Management Port:               :      -->                                    :      -->                            :         -->           SNMP                 Identification        Contact:                Device Name:                Location:                          Get Community:                Set Community:                SNMP Trusted Host:                SNMP Trap - Community:                SNMP Trap - Destination:     192.168.1.            SNMPv3 UserName:                SNMPv3 Password:                Re-enter to confirm:         -->           Local Router Access: You can change the Router's password from here. Enter a new Router password and then type it again in the Re-enter to confirm field to confirm. Wireless Web Management Access: The default is set to Enable . Allow wireless clients to configure access options to the router's web utility. More... Remote Router Access: Allows you to access your router remotely. Choose the port you would like to use. You must change the password to the router if it is still using its default password. More...                     
Home > Screenshots > Linksys > WRH54G > Management