Advanced Wireless Settings for the Linksys WRP400Router Sceenshot

Back to the Linksys WRP400



Screenshots from PortForward.com


Advanced Wireless Settings Firmware Version: 1.00.06     Advanced Wireless                  AP Isolation :   Enabled     Disabled   (Default Disabled)            Frame Burst :   Enabled     Disabled   (Default: Enabled)                      Authentication Type :   Auto Shared Key   (Default : Auto)            Basic Rate :   1-2 Mbps      Default All   (Default : Default)            Transmission Rate :   1 Mbps 2 Mbps 5.5 Mbps 6 Mbps 9 Mbps 11 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps Auto             (Default : Auto)            N Transmission Rate :     (Default: Auto)            CTS Protection Mode :   Disable    Auto   (Default : Auto)            SecureEasySetup:   Disable Enable   (Default : Enable)     -->                  Beacon Interval :    (Default:100 Milliseconds,Range:20-65535)            DTIM Interval :     (Default : 1, Range : 1 - 255)            Fragmentation Threshold :     (Default : 2346, Range : 256 - 2346)     -->        RTS Threshold :     (Default : 2347, Range : 0 - 2347)       Authentication Type: You may choose from Auto or Shared Key. Shared key authentication is more secure, but all devices on your network must also support Shared Key authentication. --> Help...                        
Home > Screenshots > Linksys > WRP400 > Advanced Wireless Settings