Basic Wireless Settings for the Linksys WRP400Router Sceenshot

Back to the Linksys WRP400



Screenshots from PortForward.com


Basic Wireless Settings --> Firmware Version: 1.00.06     Wi-Fi Protected Setup                  Wireless Configuration : Manual Wi-Fi Protected Setup            Select a SSID :       -->                   Wi-Fi Protected Setup TM            Use one of the following for each Wi-Fi Protected  Setup supported device:                         1. If your client device has a Wi-Fi Protected Setup button,click or press that button and then click the button on the right.                 OR             2. If your client device has a Wi-Fi protected Setup PIN number,enter that number here and then click           OR             3. If your client asks for the Router's PIN number,enter this number in your client device.                     Wi-Fi Protected Setup Status           Network Name (SSID)           Security           Encryption           Passphrase     -->   Help...                   -->   -->         Searching for your client device. Please wait...   If you have not clicked on the Wi-Fi Protected Setup button on your client device, please do so now.             Connecting your client device to your network. Please wait...             Congratulations!   Your client device is now securely connected to your network.     Refer back to your client device for further instructions.     Press OK to continue.       Connection Failure!   Your client device failed to connect to the network.     Refer back to your client device for further instructions.     Press OK to continue.      
Home > Screenshots > Linksys > WRP400 > Basic Wireless Settings