Voice User 1 for the Linksys WRP400Router Sceenshot

Back to the Linksys WRP400



Screenshots from PortForward.com


Voice Firmware Version: 1.00.06   Voice Wireless-G Broadband Router with 2 Phone Ports   WRP400   Setup Wireless Security Access Restrictions Applications &Gaming Administration Status Voice Info System SIP Provisioning Regional Line 1 Line 2 User 1 User 2 User Login      Product Information     Product Name : WRP400 Serial Number : CR301G900048 Software Version : 1.00.06 Hardware Version : 1.00.01 Voice Module Version : 1.0.12(20080529a) MAC Address : 001C10C2A75D Client Certificate : Installed Customization : Open System Status     Current Time : 1/1/2000 22:03:27 Elapsed Time : 1 day and 04:05:16 RTP Packets Sent : 0 RTP Bytes Sent : 0 RTP Packets Recv : 0 RTP Bytes Recv : 0 SIP Messages Sent : 0 SIP Bytes Sent : 0 SIP Messages Recv : 0 SIP Bytes Recv : 0 External IP : Line 1 Status     Hook State : On Registration State : Not Registered Last Registration At : Next Registration In : Message Waiting : No Call Back Active : No Last Called Number : Last Caller Number : Mapped SIP Port : Call 1 State : Idle Call 2 State : Idle Call 1 Tone : None Call 2 Tone : None Call 1 Encoder : Call 2 Encoder : Call 1 Decoder : Call 2 Decoder : Call 1 FAX : Call 2 FAX : Call 1 Type : Call 2 Type : Call 1 Remote Hold : Call 2 Remote Hold : Call 1 Callback : Call 2 Callback : Call 1 Peer Name : Call 2 Peer Name : Call 1 Peer Phone : Call 2 Peer Phone : Call 1 Duration : Call 2 Duration : Call 1 Packets Sent : Call 2 Packets Sent : Call 1 Packets Recv : Call 2 Packets Recv : Call 1 Bytes Sent : Call 2 Bytes Sent : Call 1 Bytes Recv : Call 2 Bytes Recv : Call 1 Decode Latency : Call 2 Decode Latency : Call 1 Jitter : Call 2 Jitter : Call 1 Round Trip Delay : Call 2 Round Trip Delay : Call 1 Packets Lost : Call 2 Packets Lost : Call 1 Packet Error : Call 2 Packet Error : Call 1 Mapped RTP Port : Call 2 Mapped RTP Port : Call 1 Media Loopback : Call 2 Media Loopback : Line 2 Status     Hook State : On Registration State : Not Registered Last Registration At : Next Registration In : Message Waiting : No Call Back Active : No Last Called Number : Last Caller Number : Mapped SIP Port : Call 1 State : Idle Call 2 State : Idle Call 1 Tone : None Call 2 Tone : None Call 1 Type : Call 2 Type : Call 1 Encoder : Call 2 Encoder : Call 1 Decoder : Call 2 Decoder : Call 1 FAX : Call 2 FAX : Call 1 Remote Hold : Call 2 Remote Hold : Call 1 Callback : Call 2 Callback : Call 1 Peer Name : Call 2 Peer Name : Call 1 Peer Phone : Call 2 Peer Phone : Call 1 Duration : Call 2 Duration : Call 1 Packets Sent : Call 2 Packets Sent : Call 1 Packets Recv : Call 2 Packets Recv : Call 1 Bytes Sent : Call 2 Bytes Sent : Call 1 Bytes Recv : Call 2 Bytes Recv : Call 1 Decode Latency : Call 2 Decode Latency : Call 1 Jitter : Call 2 Jitter : Call 1 Round Trip Delay : Call 2 Round Trip Delay : Call 1 Packets Lost : Call 2 Packets Lost : Call 1 Packet Error : Call 2 Packet Error : Call 1 Mapped RTP Port : Call 2 Mapped RTP Port : Call 1 Media Loopback : Call 2 Media Loopback :   System Configuration     Restricted Access Domains : Enable Web Admin Access : yes no Admin Passwd : User Password : Miscellaneous Settings     Syslog Server : Debug Server : Debug Level : 0 1 2 3   SIP Parameters     Max Forward : Max Redirection : Max Auth : SIP User Agent Name : SIP Server Name : SIP Reg User Agent Name : SIP Accept Language : DTMF Relay MIME Type : Remove Last Reg : yes no Use Compact Header : yes no Escape Display Name : yes no RFC 2543 Call Hold : yes no Mark All AVT Packets : yes no SIP TCP Port Min : SIP TCP Port Max : SIP Timer Values (sec)     SIP T1 : SIP T2 : SIP T4 : SIP Timer B : SIP Timer F : SIP Timer H : SIP Timer D : SIP Timer J : INVITE Expires : ReINVITE Expires : Reg Min Expires : Reg Max Expires : Reg Retry Intvl : Reg Retry Long Intvl : Response Status Code Handling     SIT1 RSC : SIT2 RSC : SIT3 RSC : SIT4 RSC : Try Backup RSC : Retry Reg RSC : RTP Parameters     RTP Port Min : RTP Port Max : RTP Packet Size : Max RTP ICMP Err : RTCP Tx Interval : No UDP Checksum : yes no Stats In BYE : yes no SDP Payload Types     NSE Dynamic Payload : AVT Dynamic Payload : INFOREQ Dynamic Payload : G726r32 Dynamic Payload : G729b Dynamic Payload : EncapRTP Dynamic Payload : RTP-Start-Loopback Dynamic Payload : RTP-Start-Loopback Codec : G711u G711a G726-32 G729a NSE Codec Name : AVT Codec Name : G711u Codec Name : G711a Codec Name : G726r32 Codec Name : G729a Codec Name : G729b Codec Name : EncapRTP Codec Name : NAT Support Parameters     Handle VIA received : yes no Handle VIA rport : yes no Insert VIA received : yes no Insert VIA rport : yes no Substitute VIA Addr : yes no Send Resp To Src Port : yes no STUN Enable : yes no STUN Test Enable : yes no STUN Server : EXT IP : EXT RTP Port Min : NAT Keep Alive Intvl :   Configuration Profile     Provision Enable : yes no Resync On Reset : yes no Resync Random Delay : Resync Periodic : Resync Error Retry Delay : Forced Resync Delay : Resync From SIP : yes no Resync After Upgrade Attempt : yes no Resync Trigger 1 : Resync Trigger 2 : Resync Fails On FNF : yes no Profile Rule : Profile Rule B : Profile Rule C : Profile Rule D : Profile Name : Profile Region : Log Resync Request Msg : Log Resync Success Msg : Log Resync Failure Msg : Report Rule : Firmware Upgrade     Upgrade Enable : yes no Upgrade Error Retry Delay : Downgrade Rev Limit : Upgrade Rule : Log Upgrade Request Msg : Log Upgrade Success Msg : Log Upgrade Failure Msg : License Keys : General Purpose Parameters     GPP A : GPP B : GPP C : GPP D : GPP E : GPP F : GPP G : GPP H : GPP I : GPP J : GPP K : GPP L : GPP M : GPP N : GPP O : GPP P :   Call Progress Tones     Dial Tone : Second Dial Tone : Outside Dial Tone : Prompt Tone : Busy Tone : Reorder Tone : Off Hook Warning Tone : Ring Back Tone : Ring Back 2 Tone : Confirm Tone : SIT1 Tone : SIT2 Tone : SIT3 Tone : SIT4 Tone : MWI Dial Tone : Cfwd Dial Tone : Holding Tone : Conference Tone : Secure Call Indication Tone : Feature Invocation Tone : Distinctive Ring Patterns     Ring1 Cadence : Ring2 Cadence : Ring3 Cadence : Ring4 Cadence : Ring5 Cadence : Ring6 Cadence : Ring7 Cadence : Ring8 Cadence : Distinctive Call Waiting Tone Patterns     CWT1 Cadence : CWT2 Cadence : CWT3 Cadence : CWT4 Cadence : CWT5 Cadence : CWT6 Cadence : CWT7 Cadence : CWT8 Cadence : Distinctive Ring/CWT Pattern Names     Ring1 Name : Ring2 Name : Ring3 Name : Ring4 Name : Ring5 Name : Ring6 Name : Ring7 Name : Ring8 Name : Ring Waveform : Sinusoid Trapezoid Ring Frequency : Ring Voltage : CWT Frequency : Synchronized Ring : yes no Control Timer Values (sec)     Hook Flash Timer Min : Hook Flash Timer Max : Callee On Hook Delay : Reorder Delay : Call Back Expires : Call Back Retry Intvl : Call Back Delay : VMWI Refresh Intvl : Interdigit Long Timer : Interdigit Short Timer : CPC Delay : CPC Duration : Vertical Service Activation Codes     Call Return Code : Call Redial Code : Blind Transfer Code : Call Back Act Code : Call Back Deact Code : Call Back Busy Act Code : Cfwd All Act Code : Cfwd All Deact Code : Cfwd Busy Act Code : Cfwd Busy Deact Code : Cfwd No Ans Act Code : Cfwd No Ans Deact Code : Cfwd Last Act Code : Cfwd Last Deact Code : Block Last Act Code : Block Last Deact Code : Accept Last Act Code : Accept Last Deact Code : CW Act Code : CW Deact Code : CW Per Call Act Code : CW Per Call Deact Code : Block CID Act Code : Block CID Deact Code : Block CID Per Call Act Code : Block CID Per Call Deact Code : Block ANC Act Code : Block ANC Deact Code : DND Act Code : DND Deact Code : CID Act Code : CID Deact Code : CWCID Act Code : CWCID Deact Code : Dist Ring Act Code : Dist Ring Deact Code : Speed Dial Act Code : Secure All Call Act Code : Secure No Call Act Code : Secure One Call Act Code : Secure One Call Deact Code : Conference Act Code : Attn-Xfer Act Code : Modem Line Toggle Code : FAX Line Toggle Code : Media Loopback Code : Referral Services Codes : Feature Dial Services Codes : Vertical Service Announcement Codes     Service Annc Base Number : Service Annc Extension Codes : Outbound Call Codec Selection Codes     Prefer G711u Code : Force G711u Code : Prefer G711a Code : Force G711a Code : Prefer G726r32 Code : Force G726r32 Code : Prefer G729a Code : Force G729a Code : Miscellaneous     Set Local Date (mm/dd) : Set Local Time (HH/mm) : Time Zone : GMT-12:00 GMT-11:00 GMT-10:00 GMT-09:00 GMT-08:00 GMT-07:00 GMT-06:00 GMT-05:00 GMT-04:00 GMT-03:30 GMT-03:00 GMT-02:00 GMT-01:00 GMT GMT+01:00 GMT+02:00 GMT+03:00 GMT+03:30 GMT+04:00 GMT+05:00 GMT+05:30 GMT+05:45 GMT+06:00 GMT+06:30 GMT+07:00 GMT+08:00 GMT+09:00 GMT+09:30 GMT+10:00 GMT+11:00 GMT+12:00 GMT+13:00 FXS Port Impedance : 600 900 600+2.16uF 900+2.16uF 270+750||150nF 220+820||120nF 220+820||115nF 200+600||100nF Daylight Saving Time Rule : FXS Port Input Gain : FXS Port Output Gain : DTMF Playback Level : DTMF Playback Length : Detect ABCD : yes no Playback ABCD : yes no Caller ID Method : Bellcore(N.Amer,China) DTMF(Finland,Sweden) DTMF(Denmark) ETSI DTMF ETSI DTMF With PR ETSI DTMF After Ring ETSI FSK ETSI FSK With PR(UK) FXS Port Power Limit : 1 2 3 4 5 6 7 8 Caller ID FSK Standard : bell 202 v.23 Feature Invocation Method : Default Sweden   Line Enable : yes no Streaming Audio Server (SAS)     SAS Enable : yes no SAS DLG Refresh Intvl : SAS Inbound RTP Sink : NAT Settings     NAT Mapping Enable : yes no NAT Keep Alive Enable : yes no NAT Keep Alive Msg : NAT Keep Alive Dest : Network Settings     SIP ToS/DiffServ Value : SIP CoS Value : [0-7] RTP ToS/DiffServ Value : RTP CoS Value : [0-7] Network Jitter Level : low medium high very high extremely high Jitter Buffer Adjustment : up and down up only down only disable SIP Settings     SIP Transport : UDP TCP TLS SIP Port : SIP 100REL Enable : yes no EXT SIP Port : Auth Resync-Reboot : yes no SIP Proxy-Require : SIP Remote-Party-ID : yes no SIP GUID : yes no SIP Debug Option : none 1-line 1-line excl. OPT 1-line excl. NTFY 1-line excl. REG 1-line excl. OPT|NTFY|REG full full excl. OPT full excl. NTFY full excl. REG full excl. OPT|NTFY|REG RTP Log Intvl : Restrict Source IP : yes no Referor Bye Delay : Refer Target Bye Delay : Referee Bye Delay : Refer-To Target Contact : yes no Sticky 183 : yes no Auth INVITE : yes no Reply 182 On Call Waiting : yes no Call Feature Settings     Blind Attn-Xfer Enable : yes no MOH Server : Xfer When Hangup Conf : yes no Conference Bridge URL : Conference Bridge Ports : 3 4 5 6 7 8 9 10 Proxy and Registration     Proxy : Outbound Proxy : Use Outbound Proxy : yes no Use OB Proxy In Dialog : yes no Register : yes no Make Call Without Reg : yes no Register Expires : Ans Call Without Reg : yes no Use DNS SRV : yes no DNS SRV Auto Prefix : yes no Proxy Fallback Intvl : Proxy Redundancy Method : Normal Based on SRV Port Voice Mail Server : Mailbox Subscribe Expires : Subscriber Information     Display Name : User ID : Password : Use Auth ID : yes no Auth ID : Directory Number : Mini Certificate : SRTP Private Key : Supplementary Service Subscription     Call Waiting Serv : yes no Block CID Serv : yes no Block ANC Serv : yes no Dist Ring Serv : yes no Cfwd All Serv : yes no Cfwd Busy Serv : yes no Cfwd No Ans Serv : yes no Cfwd Sel Serv : yes no Cfwd Last Serv : yes no Block Last Serv : yes no Accept Last Serv : yes no DND Serv : yes no CID Serv : yes no CWCID Serv : yes no Call Return Serv : yes no Call Redial Serv : yes no Call Back Serv : yes no Three Way Call Serv : yes no Three Way Conf Serv : yes no Attn Transfer Serv : yes no Unattn Transfer Serv : yes no MWI Serv : yes no VMWI Serv : yes no Speed Dial Serv : yes no Secure Call Serv : yes no Referral Serv : yes no Feature Dial Serv : yes no Service Announcement Serv : yes no Audio Configuration     Preferred Codec : G711u G711a G726-32 G729a Silence Supp Enable : yes no Use Pref Codec Only : yes no Silence Threshold : high medium low G729a Enable : yes no Echo Canc Enable : yes no Echo Canc Adapt Enable : yes no Echo Supp Enable : yes no FAX V21 Detect Enable : yes no G726-32 Enable : yes no FAX CNG Detect Enable : yes no FAX Passthru Codec : G711u G711a DTMF Process INFO : yes no FAX Codec Symmetric : yes no DTMF Process AVT : yes no FAX Passthru Method : None NSE ReINVITE DTMF Tx Method : InBand AVT INFO Auto DTMF Tx Mode : Normal Strict FAX Process NSE : yes no Hook Flash Tx Method : None AVT INFO FAX Disable ECAN : yes no Release Unused Codec : yes no FAX Enable T38 : yes no FAX T38 Redundancy : 0 1 2 3 FAX Tone Detect Mode : caller or callee caller only callee only Dial Plan     Dial Plan : Enable IP Dialing : yes no Emergency Number : FXS Port Polarity Configuration     Idle Polarity : Forward Reverse Caller Conn Polarity : Forward Reverse Callee Conn Polarity : Forward Reverse   Line Enable : yes no Streaming Audio Server (SAS)     SAS Enable : yes no SAS DLG Refresh Intvl : SAS Inbound RTP Sink : NAT Settings     NAT Mapping Enable : yes no NAT Keep Alive Enable : yes no NAT Keep Alive Msg : NAT Keep Alive Dest : Network Settings     SIP ToS/DiffServ Value : SIP CoS Value : [0-7] RTP ToS/DiffServ Value : RTP CoS Value : [0-7] Network Jitter Level : low medium high very high extremely high Jitter Buffer Adjustment : up and down up only down only disable SIP Settings     SIP Transport : UDP TCP TLS SIP Port : SIP 100REL Enable : yes no EXT SIP Port : Auth Resync-Reboot : yes no SIP Proxy-Require : SIP Remote-Party-ID : yes no SIP GUID : yes no SIP Debug Option : none 1-line 1-line excl. OPT 1-line excl. NTFY 1-line excl. REG 1-line excl. OPT|NTFY|REG full full excl. OPT full excl. NTFY full excl. REG full excl. OPT|NTFY|REG RTP Log Intvl : Restrict Source IP : yes no Referor Bye Delay : Refer Target Bye Delay : Referee Bye Delay : Refer-To Target Contact : yes no Sticky 183 : yes no Auth INVITE : yes no Reply 182 On Call Waiting : yes no Call Feature Settings     Blind Attn-Xfer Enable : yes no MOH Server : Xfer When Hangup Conf : yes no Conference Bridge URL : Conference Bridge Ports : 3 4 5 6 7 8 9 10 Proxy and Registration     Proxy : Outbound Proxy : Use Outbound Proxy : yes no Use OB Proxy In Dialog : yes no Register : yes no Make Call Without Reg : yes no Register Expires : Ans Call Without Reg : yes no Use DNS SRV : yes no DNS SRV Auto Prefix : yes no Proxy Fallback Intvl : Proxy Redundancy Method : Normal Based on SRV Port Voice Mail Server : Mailbox Subscribe Expires : Subscriber Information     Display Name : User ID : Password : Use Auth ID : yes no Auth ID : Directory Number : Mini Certificate : SRTP Private Key : Supplementary Service Subscription     Call Waiting Serv : yes no Block CID Serv : yes no Block ANC Serv : yes no Dist Ring Serv : yes no Cfwd All Serv : yes no Cfwd Busy Serv : yes no Cfwd No Ans Serv : yes no Cfwd Sel Serv : yes no Cfwd Last Serv : yes no Block Last Serv : yes no Accept Last Serv : yes no DND Serv : yes no CID Serv : yes no CWCID Serv : yes no Call Return Serv : yes no Call Redial Serv : yes no Call Back Serv : yes no Three Way Call Serv : yes no Three Way Conf Serv : yes no Attn Transfer Serv : yes no Unattn Transfer Serv : yes no MWI Serv : yes no VMWI Serv : yes no Speed Dial Serv : yes no Secure Call Serv : yes no Referral Serv : yes no Feature Dial Serv : yes no Service Announcement Serv : yes no Audio Configuration     Preferred Codec : G711u G711a G726-32 G729a Silence Supp Enable : yes no Use Pref Codec Only : yes no Silence Threshold : high medium low G729a Enable : yes no Echo Canc Enable : yes no Echo Canc Adapt Enable : yes no Echo Supp Enable : yes no FAX V21 Detect Enable : yes no G726-32 Enable : yes no FAX CNG Detect Enable : yes no FAX Passthru Codec : G711u G711a DTMF Process INFO : yes no FAX Codec Symmetric : yes no DTMF Process AVT : yes no FAX Passthru Method : None NSE ReINVITE DTMF Tx Method : InBand AVT INFO Auto DTMF Tx Mode : Normal Strict FAX Process NSE : yes no Hook Flash Tx Method : None AVT INFO FAX Disable ECAN : yes no Release Unused Codec : yes no FAX Enable T38 : yes no FAX T38 Redundancy : 0 1 2 3 FAX Tone Detect Mode : caller or callee caller only callee only Dial Plan     Dial Plan : Enable IP Dialing : yes no Emergency Number : FXS Port Polarity Configuration     Idle Polarity : Forward Reverse Caller Conn Polarity : Forward Reverse Callee Conn Polarity : Forward Reverse   Call Forward Settings     Cfwd All Dest : Cfwd Busy Dest : Cfwd No Ans Dest : Cfwd No Ans Delay : Selective Call Forward Settings     Cfwd Sel1 Caller : Cfwd Sel1 Dest : Cfwd Sel2 Caller : Cfwd Sel2 Dest : Cfwd Sel3 Caller : Cfwd Sel3 Dest : Cfwd Sel4 Caller : Cfwd Sel4 Dest : Cfwd Sel5 Caller : Cfwd Sel5 Dest : Cfwd Sel6 Caller : Cfwd Sel6 Dest : Cfwd Sel7 Caller : Cfwd Sel7 Dest : Cfwd Sel8 Caller : Cfwd Sel8 Dest : Cfwd Last Caller : Cfwd Last Dest : Block Last Caller : Accept Last Caller : Speed Dial Settings     Speed Dial 2 : Speed Dial 3 : Speed Dial 4 : Speed Dial 5 : Speed Dial 6 : Speed Dial 7 : Speed Dial 8 : Speed Dial 9 : Supplementary Service Settings     CW Setting : yes no Block CID Setting : yes no Block ANC Setting : yes no DND Setting : yes no CID Setting : yes no CWCID Setting : yes no Dist Ring Setting : yes no Secure Call Setting : yes no Message Waiting : yes no Accept Media Loopback Request : never automatic manual Media Loopback Mode : source mirror Media Loopback Type : media packet Distinctive Ring Settings     Ring1 Caller : Ring2 Caller : Ring3 Caller : Ring4 Caller : Ring5 Caller : Ring6 Caller : Ring7 Caller : Ring8 Caller : Ring Settings     Default Ring : 1 2 3 4 5 6 7 8 Default CWT : 1 2 3 4 5 6 7 8 Hold Reminder Ring : 1 2 3 4 5 6 7 8 none Call Back Ring : 1 2 3 4 5 6 7 8   Call Forward Settings     Cfwd All Dest : Cfwd Busy Dest : Cfwd No Ans Dest : Cfwd No Ans Delay : Selective Call Forward Settings     Cfwd Sel1 Caller : Cfwd Sel1 Dest : Cfwd Sel2 Caller : Cfwd Sel2 Dest : Cfwd Sel3 Caller : Cfwd Sel3 Dest : Cfwd Sel4 Caller : Cfwd Sel4 Dest : Cfwd Sel5 Caller : Cfwd Sel5 Dest : Cfwd Sel6 Caller : Cfwd Sel6 Dest : Cfwd Sel7 Caller : Cfwd Sel7 Dest : Cfwd Sel8 Caller : Cfwd Sel8 Dest : Cfwd Last Caller : Cfwd Last Dest : Block Last Caller : Accept Last Caller : Speed Dial Settings     Speed Dial 2 : Speed Dial 3 : Speed Dial 4 : Speed Dial 5 : Speed Dial 6 : Speed Dial 7 : Speed Dial 8 : Speed Dial 9 : Supplementary Service Settings     CW Setting : yes no Block CID Setting : yes no Block ANC Setting : yes no DND Setting : yes no CID Setting : yes no CWCID Setting : yes no Dist Ring Setting : yes no Secure Call Setting : yes no Message Waiting : yes no Accept Media Loopback Request : never automatic manual Media Loopback Mode : source mirror Media Loopback Type : media packet Distinctive Ring Settings     Ring1 Caller : Ring2 Caller : Ring3 Caller : Ring4 Caller : Ring5 Caller : Ring6 Caller : Ring7 Caller : Ring8 Caller : Ring Settings     Default Ring : 1 2 3 4 5 6 7 8 Default CWT : 1 2 3 4 5 6 7 8 Hold Reminder Ring : 1 2 3 4 5 6 7 8 none Call Back Ring : 1 2 3 4 5 6 7 8      
Home > Screenshots > Linksys > WRP400 > Voice User 1