Advanced Wireless Settings for the Linksys WRT120NRouter Sceenshot

Back to the Linksys WRT120N



Screenshots from PortForward.com


Wireless-Advanced Wireless Settings Firmware Version: v1.0.01    Wireless Wireless-N Home Router  WRT120N @ Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Basic Wireless Settings   Wireless Security   Wireless MAC Filter   Advanced Wireless Settings Advanced Wireless   AP Isolation: Enable   Disable   (Default: Disabled) Frame Burst: Enable   Disable   (Default: Enabled)   Authentication Type: Auto Open Shared   (Default: Auto)   Basic Rate: 1-2 Mbps default Auto (Default: Auto) Transmission Rate Auto (Default: Auto) N Transmission Rate:: Auto 0 - 6.5Mbps 1 - 13Mbps 2 - 19.5Mbps 3 - 26Mbps 4 - 39Mbps 5 - 52Mbps 6 - 58.5Mbps 7 - 65Mbps (Default: Auto) CTS Protection Mode: Disabled Auto (Default: Auto)   Beacon Interval: (Default: 100 Msec, Range: 20 ~ 1000)   DTIM Interval: (Default: 1, Range: 1 ~ 255)   Fragmentation Threshold: (Default: 2346, Range: 256 ~ 2346)   RTS Threshold: (Default: 2347, Range: 0 ~ 2347)     Help...                          
Home > Screenshots > Linksys > WRT120N > Advanced Wireless Settings