Basic Wireless Settings for the Linksys WRT120NRouter Sceenshot

Back to the Linksys WRT120N



Screenshots from PortForward.com


Wireless-Basic Wireless Settings Firmware Version: v1.0.01    Wireless Wireless-N Home Router  WRT120N °@ Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Basic Wireless Settings   Wireless Security   Wireless MAC Filter   Advanced Wireless Settings --> --> --> Wi-Fi Protected Setupô   Configuration View: Manual   Wi-Fi Protected Setupô   Network Mode: Mixed BG-Mixed Wireless-G Only Wireless-B Only Wireless-N Only Disabled Network Name (SSID): Channel Width: Auto (20MHz or 40MHz) 20MHz only 40MHz only Wide Channel:: Auto Standard Channel: Auto 1 - 2.412GHz 2 - 2.417GHz 3 - 2.422GHz 4 - 2.427GHz 5 - 2.432GHz 6 - 2.437GHz 7 - 2.442GHz 8 - 2.447GHz 9 - 2.452GHz 10 - 2.457GHz 11 - 2.462GHz SSID Broadcast: Enabled Disabled WMM: --> Wi-Fi Protected Setupô Use one of the following for each Wi-Fi Protected Setup supported device: 1. If your client device has a Wi-Fi Protected Setup button, click or press that button, and then click the button on the right. OR 2. If your client device has a Wi-Fi Protected Setup PIN number, enter that number here and then click OR 3. If your client asks for the Router's PIN number, enter this number in your client device. Wi-Fi Protected Setup Status: Configured Network Name (SSID): Security: WPA2 Personal Encryption: TKIP or AES Passphrase:     Help...                          
Home > Screenshots > Linksys > WRT120N > Basic Wireless Settings