Advanced Wireless Settings for the Linksys WRT150NRouter Sceenshot

Back to the Linksys WRT150N



Screenshots from PortForward.com


Advanced Wireless Settings Firmware Version: v1.01.9    Wireless Wireless-N Home Router WRT150N Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Basic Wireless Settings | Wireless Security | Wireless MAC Filter | Advanced Wireless Settings Advanced Wireless AP Isolation: Enabled Disabled ( Default:  Disabled) Frame Burst: Enabled Disabled ( Default:  Enabled) Authentication Type: Auto Shared Key     (Default: Auto) Basic Rate: 1-2 Mbps         Default All (Default: Default) Transmission Rate: Auto                1 Mbps 2 Mbps 5.5 Mbps 6 Mbps 9 Mbps 11 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps (Default: Auto) N Transmission Rate:    (Default: Auto) CTS Protection Mode: Disabled          Auto ( Default:  Auto) : (: ) --> Beacon Interval: ( Default: 100, Milliseconds, Range: 1 - 65535) DTIM Interval: ( Default: 1, Range: 1 - 255) Fragmentation Threshold: ( Default: 2346, Range: 256 - 2346) RTS Threshold: ( Default: 2347, Range: 0 - 2347)   Help... Save Settings Cancel Changes
Home > Screenshots > Linksys > WRT150N > Advanced Wireless Settings