Advanced Wireless Settings for the Linksys WRT54GRouter Sceenshot

Back to the Linksys WRT54G



Screenshots from PortForward.com


Firmware Version: v1.02.6     Wireless Wireless-G Broadband Router   WRT54G   Setup Wireless Security Access Restrictions Applications & Gaming      Administration      Status      Basic Wireless Settings |   Wireless Security |   Wireless MAC Filter | Advanced Wireless Settings Advanced Wireless                       Authentication Type: Auto Shared Key    (Default: Auto)           Basic Rate: 1-2 Mbps      Default All    (Default: Default)           Transmission Rate: Auto 1 Mbps 2 Mbps 5.5 Mbps 6 Mbps 9 Mbps 11 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps    (Default: Auto)           CTS Protection Mode: Disable    Auto      (Default: Disable)           Frame Burst: Disable    Enable    (Default: Disable)           Beacon Interval:    (Default: 100,Milliseconds, Range: 1 - 65535)           DTIM Interval:    (Default: 1, Range: 1 - 255)           Fragmentation Threshold:    (Default:2346, Range: 256 - 2346)           RTS Threshold:    (Default:2347, Range: 0 - 2347)           AP Isolation: Off    On    (Default: Off)           Secure Easy Setup: Disable    Enable    (Default: Enable)                     Authentication Type: You may choose from Auto or Shared Key. Shared key authentication is more secure, but all devices on your network must also support Shared Key authentication. More...             
Home > Screenshots > Linksys > WRT54G > Advanced Wireless Settings