Advanced Wireless Settings for the Linksys WRT54GRRouter Sceenshot

Back to the Linksys WRT54GR



Screenshots from PortForward.com


Advanced Wireless Settings Firmware Version: 1.04, Apr 26, 2006 Wireless Wireless-G Broadband Router with RangeBooster WRT54GR Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Basic Wireless Settings Wireless Security Wireless MAC Filter Advanced Wireless Settings Advanced Wireless           Frame Burst Mode: Enabled   Disabled ( Default: Enabled) AP Isolation: Enabled   Disabled ( Default: Disabled) Authentication Type: Auto Open System Shared Key  ( Default: Auto) Basic Rate: Default 1 ~ 2 Mbps     All  ( Default: Default) Transmission Rate: Auto 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps          ( Default: Time Zone) Transmission Power: Full Half Quarter          Eighth Min  ( Default: Full) CTS Protection Mode: Time Zone Disabled          ( Default: Time Zone) 11G Protection Mode: Auto Always On Always Off Data Rate: Auto 1M 2M 5.5M 11M 6M 9M 12M 18M 24M 36M 48M 54M Preamble:   Long Preamble    Short Preamble Beacon Interval:   ( Default: 100, Milliseconds,     Range: 20~1000 ) DTIM Interval:   ( Default: 1, Range: 1 - 255) Fragmentation Threshold:   ( Default: 2346, Range: 256 - 2346) RTS Threshold:   ( Default: 2346, Range: 256 - 2346) Help... Save Settings Cancel Changes
Home > Screenshots > Linksys > WRT54GR > Advanced Wireless Settings