Advanced Wireless Settings for the Linksys WRT54GX2Router Sceenshot

Back to the Linksys WRT54GX2



Screenshots from PortForward.com


Advanced Wireless Settings Firmware Version: 1.01.06    Wireless    WRT54GX2 Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Basic Wireless Settings |   Wireless Security |   Wireless Network Access | Advanced Wireless Settings Advanced Wireless                       Basic Rate Set: 1-2 Mbps      Basic Rate Set #1 Basic Rate Set #2   ( Default: set #2)           Transmission Rate: 1 Mbps 2 Mbps 5.5 Mbps 6 Mbps 9 Mbps 11 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps 72 Mbps 96 Mbps 108 Mbps Auto             ( Default: Auto)           CTS Protection Mode: Disable    Auto   ( Default: Auto)           Beacon Interval:   ( Default: 100, Milliseconds, Range: 1 -                         65535)           DTIM Interval:   ( Default: 1, Range: 1 - 255)           Fragmentation Threshold:   ( Default: 2346, Range: 256 - 2346)           RTS Threshold:   ( Default: 2347, Range: 0 - 2347)           Preamble Type: Long Short   ( Default: Long)           Network Density: Low Medium High   ( Default: Low)                                   Basic rate set: Basic rate set is what is advertised as basic rate with AP. The default value is set to Set #2. Depending on the wireless mode you have selected, a default set of supported data rates will be selected. The default setting will ensure maximum compatibility with all devices. For compatibility with older Wireless-B devices, select 1-2Mbps. More...                              
Home > Screenshots > Linksys > WRT54GX2 > Advanced Wireless Settings