Advanced Wireless for the Linksys WRT55AGRouter Sceenshot

Back to the Linksys WRT55AG



Screenshots from PortForward.com


Linksys WRT55AG : Advanced Wireless Advanced Wireless The Advanced Wireless screen allows you to customize data transmission settings. In most cases, the advanced settings on this screen should remain at their default values. Wireless MAC Filters :      Disable Enable     Authentication Type :      Open System Shared Key   (Default: Open System) DFS :      Disable Enable   Transmit Rate :      6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps Auto                (Default: Auto) Transmit Power Control :      Full Half Quarter          Eighth Min   (Default: Full) Turbo Mode :      Disable Enable   Beacon Interval :        (Default: 100 Milliseconds, Range: 20 - 1000) DTIM Interval :        (Default: 1, Range: 1 - 16384) RTS Threshold :        (Default: 2346, Range: 256 - 2346) Fragmentation Length :        (Default: 2346, Range: 256 - 2346) AP Mode :      Access Point     Wireless Bridge                           Authentication Type :      Open System Shared Key Auto   (Default: Auto) Transmit Rate :      6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps Auto                (Default: Auto) Beacon Interval :        (Default: 100 Milliseconds, Range: 1 - 65535) DTIM Interval :        (Default: 3, Range: 1 - 255) RTS Threshold :        (Default: 2346, Range: 0 - 2347) Fragmentation   Threshold :        (Default: 2346, Range: 256 - 2346) Basic Rate:  Default    All SSID Broadcast :   Enable    Disable    AP Mode :      Access Point Bridge Restrict :     Enabled Disabled     Wireless Bridge                              
Home > Screenshots > Linksys > WRT55AG > Advanced Wireless