Back to the Linksys WRTP54G-ER

---

IP Filters Firmware Version: 1.00.48    Access Restrictions Wireless-G Broadband Router with 2 Phone Ports   WRTP54G Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Voice Filter       Filter IP Address Range             NUM     Start       End               :     ~           :     ~           :     ~           :     ~           :     ~         Filter Port Range             NUM Protocol     Start          End             :   TCP UDP Both   ~             :   TCP UDP Both   ~             :   TCP UDP Both   ~             :   TCP UDP Both   ~             :   TCP UDP Both   ~             Filter MAC Address     Block WAN Requests     Block Anonymous Internet Requests: Enabled  Disabled         Filter Multicast: Enabled  Disabled                                   Filters By using the Filters screen, you can configure the Router to block specific internal users from accessing the Internet. You can set up different filters for different users based on their IP addresses, MAC addresses, and their services port numbers. To set Filter IP Address Range , do the following: Enter the range of IP addresses that you want to filter into the IP address range fields. The users who have these IP addresses will not be able to access the Internet. Click the Save Settings button to save any changes. To set Filter Port Range , do the following: You can filter users by entering their services port numbers. More...