Advanced Routing for the Linksys WRV200Router Sceenshot

Back to the Linksys WRV200



Screenshots from PortForward.com


Setup Firmware Version: 1.0.29 Setup Wireless-G VPN Router with RangeBooster WRV200 Setup Wireless Firewall VPN QoS Administration Status Basic Setup VLAN DDNS MAC Address Clone Advanced Routing Advanced Routing Static Routing       Operation Mode:  Gateway  Router Disabled Enabled     Dynamic Routing (RIP):  Enabled  Disabled         Receive RIP versions:              RIPv1 RIPv2 Both RIP v1 and v2         Transmit RIP versions:             RIPv1 RIPv2 Both RIP v1 and v2     Route Entries:         Enter Route Name:       LAN IP Address:   . . .     Subnet Mask :   . . .     Gateway :   . . .     Interface :   LAN & Wireless Internet   Advanced Routing On this screen, configure the routing mode and settings for the Router. Gateway mode is recommended for most users. More...  Advanced Routing  On this screen,  configure the routing  mode and settings for  the Router. Gateway  mode is recommended  for most users.  More... Save Settings Cancel Changes
Home > Screenshots > Linksys > WRV200 > Advanced Routing