Port Triggering for the Linksys WRV54GRouter Sceenshot

Back to the Linksys WRV54G



Screenshots from PortForward.com


Applications & Gaming      Firmware Version: 2. 03      Firmware Version: 1. 05 Applications & Gaming Wireless-G VPN Router      WRV54G   Setup Wireless Security Access Restrictions Applications & Gaming Administration Status     Port Range Forwarding Port Triggering UPnP Forwarding DMZ Port Triggering Triggered Range Forwarded Range Application Start Port End Port Start port End Port Protocol Enabled App Name Trigger Port Range Forwarding Port Range Port Triggering is used for special Internet applications whose outgoing ports differ from the incoming ports. For this feature, the Router will watch outgoing data for specific port numbers. The Router will remember the IP address of the computer that sends a transmission requesting data, so that when the requested data returns through the Router, the data is pulled back to the proper computer by way of IP address and port mapping rules. Application: Enter the name you wish to give each application. Start Port and End Port: Enter the starting and ending Triggered range numbers and the Forwarded Range numbers of the port you wish to forward. Protocol: Select the type of protocol you wish to use for each application: TCP , UDP , or Both .   Save Settings Cancel Changes       Save Settings Cancel Changes
Home > Screenshots > Linksys > WRV54G > Port Triggering