Advanced Routing for the Linksys WRV54Gv2.36Router Sceenshot

Back to the Linksys WRV54Gv2.36



Screenshots from PortForward.com


Setup      Firmware Version: 2. 36      Firmware Version: 1. 05 Setup Wireless-G VPN Router      WRV54G   Setup Wireless Security Access Restrictions Applications & Gaming Administration Status     Basic Setup DDNS MAC Address Clone Advanced Routing Hot Spot Advanced Routing   Operating Mode: Gateway  Router  The router can be setup to route between two different networks. Select the appropriate routing mode for your network and enter the required settings. If you are unsure of these settings, contact your network administrator. Dynamic Routing   RIP: Enabled Disabled   Receive RIP versions: None RIPv1 RIPv2 Both RIP v1 and v2   Transmit RIP versions: None RIPv1 RIPv2 - Broadcast RIPv2 - Multicast   RIP: Enabled   Disabled Static Routing       Select Number: 1 --- 2 --- 3 --- 4 --- 5 --- 6 --- 7 --- 8 --- 9 --- 10 ---     LAN IP Address: . . .   Subnet Mask : . . .   Default Gateway : . . .   metric :   Interface : LAN & Wireless Internet (WAN)   Save Settings Cancel Changes       Save Settings Cancel Changes
Home > Screenshots > Linksys > WRV54Gv2.36 > Advanced Routing