Advanced Routing for the Linksys WRVS4400NRouter Sceenshot

Back to the Linksys WRVS4400N



Screenshots from PortForward.com


Advanced Routing Firmware Version: V1.00.12 Setup Wireless-N Gigabit Security Router with VPN WRVS4400N Setup Wireless Firewall VPN QoS Administration IPS L2 Switch Status     IP Versions    | WAN |    LAN    | DMZ    | MAC Address Clone    | DDNS    | --> Advanced Routing | Time Advanced Routing     Operation Mode : Internet Gateway        Intranet Router This tab is for setting the Router advanced functions. You can choose to harness the router as a gateway for your network. Using Routing Information Protocol (RIP), dynamic routing can automatically adjust how packets travel on your network. Static Routing sets up a fixed route to another network destination. More...   Dynamic Routing RIP: RIP Send Packet Version: RIP Recv Packet Version: Enabled         Disabled   RIPv1 RIPv2   RIPv1 RIPv2   Static Routing Select Set Number: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Destination IP Prefix: . . . Subnet Mask: . . . Next Hop Router: . . . Hop Count:            
Home > Screenshots > Linksys > WRVS4400N > Advanced Routing