Basic Settings for the Linksys WRVS4400NRouter Sceenshot

Back to the Linksys WRVS4400N



Screenshots from PortForward.com


Basic Settings Firmware Version: V1.00.12 Firewall Wireless-N Gigabit Security Router with VPN WRVS4400N --> Setup Wireless Firewall VPN QoS Administration IPS L2 Switch Status    Basic Settings   |   IP Based ACL   |   Internet Access Policy   |   Single Port Forwarding   |   Port Range Forwarding   |   More... >> Basic Settings   Firewall : Enable Disable   DoS Protection : Enable Disable   Block WAN Request : Enable Disable   Remote Management : Enable Disable Port: HTTPS : Enable Disable   Multicast Pass Through : Enable Disable   MTU : Auto Manual Bytes Firewall Tab allow your configure software security features like SPI (Stateful Packet Inspection) Firewall, IP based Access List, restriction LAN users on Internet (WAN port) access, and NAPT (Network Address Port Translation) Settings (only works when NAT is enabled) to limited services to specific ports. More...   Block:     Java     Cookies     ActiveX     Access to Proxy HTTP Server            
Home > Screenshots > Linksys > WRVS4400N > Basic Settings