DHCP Server for the Luxul ABR-4500Router Sceenshot

Back to the Luxul ABR-4500



Screenshots from PortForward.com


Epic 4 ABR-4500V1 Firmware Version: 5.0.1 Quick Setup Status Overview Connected Clients Port State Overview Network DHCP Server Static Leases Dynamic DNS VLAN Routing Multi-WAN WAN Settings Firewall/Security Port Forwarding DMZ UPnP Web Filtering Parental Controls QoS USB Setup Devices Access Media Server VPN VPN Server VPN User Administration Auto Update Firmware Update Factory Defaults Backup/Restore System Log Admin Password Set Time Advanced Software Notice Tools Iperf Ping Trace Route Copyright ©2017 Luxul Multi-WAN Setup DHCP Enable DHCP Server Enabled Disabled IPv4 Class Class C Class B Local Network / LAN: LAN IP Address 192.168.0.1 LAN Subnet Mask 255.255.255.0 LAN IP Address End 192.168.0.254 DHCP Range: Start 192.168.0. Number of IP Addresses Notice : Undefined index: classCIPAddrNum in /www/views/dhcp/setup.php on line 93 "/> End 192.168.0. Lease Time (hours) Local Network / LAN: LAN IP Address LAN Subnet Mask 255.255.0.0 (65534) 255.255.128.0 (32766) 255.255.192.0 (16382) 255.255.224.0 (8190) 255.255.240.0 (4094) 255.255.248.0 (2046) 255.255.252.0 (1022) 255.255.254.0 (510) 255.255.255.0 (254) LAN IP Address Start 192.168.0.1 LAN IP Address End 192.168.0.254 DHCP Range: Start Number of IP Addresses End Lease Time (hours) Help DHCP Server The DHCP Server feature is used to automatically assign IP Addresses to devices on the LAN. If disabled, the IP Address for each device must be set manually. ABR-4500
Home > Screenshots > Luxul > ABR-4500 > DHCP Server