Setup Wizard for the MediaLink MWN-WAPR150NRouter Sceenshot
Back to the MediaLink MWN-WAPR150N
Wizard Help There are two configuration options to set up your Internet connection: Setup Wizard or manual configuration in the menu. You may wish to contact your Internet service provider for your connectivity information. Notice: When you set up L2TP OR PPTP Mode, Please do specify the DNS settings firstly in the page: [Advanced Settings]->[DNS Settings]. Setup Wizard There are five Internet connection modes to choose from: Static IP, Dynamic IP, PPPOE, L2TP, PPTP. If you are unsure of your connection method, please contact your Internet Service Provider. Enable auto detect,please click detecting... ADSL Virtual Dial-up (via PPPoE) Dynamic IP (via DHCP) Static IP L2TP PPTP 802.1X --> Setup Wizard-Static IP This Internet connection mode requires network address information from your Internet service provider. IP Address: Subnet Mask: Gateway: Primary DNS Server: Secondary DNS Server: (optional) Setup Wizard-PPPoE In order to access your Internet service provider's network, you are required to provide correct user account and password. Account: Password: Setup Wizard-L2TP L2TP Server: (IP or Domain name) User Name: Password: Address Mode: Static Dynamic IP Address: Subnet Mask: Default Gateway: Setup Wizard-PPTP PPTP Server: (IP or Domain name) User Name: Password: Address Mode: Static Dynamic IP Address: Subnet Mask: Default Gateway: Setup Wizard-802.1X User Name: Password: Address Mode: Static Dynamic IP Address: NetMask: Default gateway: DNS Server: Secondary DNS Server: (Optional) Setup Wizard The basic configuration is completed. Please apply and reboot the device ,or press "Reboot" button in System Tools of the left menu.